Wis. Admin. Code Department of Transportation Trans 305.58 - Wiring
(1) Wiring for both low tension and high
tension circuits shall be constructed and installed so as to function reliably
and adequately.
(2) Required lamps
shall be connected to the power source with stranded wire.
(3) Wiring shall, when possible, be grouped
together and protected by tape, braid, sheath, tube or other covering capable
of withstanding surface abrasion.
(4) Wiring shall be properly
supported.
(5) Wiring may not be
located where it is likely to be charred, overheated or enmeshed in moving
parts.
(6) The edges of all holes
in metal through which the wiring passes, unless the wiring is metal covered,
shall be rolled or bushed with a grommet of rubber or other suitable
material.
Notes
State regulations are updated quarterly; we currently have two versions available. Below is a comparison between our most recent version and the prior quarterly release. More comparison features will be added as we have more versions to compare.
No prior version found.