Wis. Admin. Code Department of Transportation Trans 309.12 - Tires and wheels
(1) Each tire shall have not less than
1/8 inch tread
depth. The depth shall be measured at 2 points not less than 15 inches apart in
any major tread groove at or near the center of the tire.
(2) Wheels, tires and brake drum assemblies
shall be in balance.
(3) Snow tires
with tungsten carbide studs, which shall not project more than one-eighth inch
beyond the treads surface of the tire, may be installed on an ambulance from
the 15th day of November each year through the 1st day of April of the
following year.
(4) Recapped tires
may not be installed on any ambulance.
(5) Tires shall be maintained in good working
condition. Tires shall not have serious cuts, bulges, sidewall defects or
exposed fabric or cords.
(6) Radial
and bias tires shall not be mounted on the same axle.
(7) Wheels shall not have any cracks,
unseated lock rings, loose, broken or missing lugs, studs or clamps, bent or
cracked rims or elongated stud holes.
(8) Tires shall not be loaded above the
manufacturer's weight limits.
Notes
State regulations are updated quarterly; we currently have two versions available. Below is a comparison between our most recent version and the prior quarterly release. More comparison features will be added as we have more versions to compare.
No prior version found.