045-16 Wyo. Code R. §§ 16-4 - Digital Billboards

(a) The message, messages, or copy displayed on a digital billboard:

(i) Shall not be displayed through blinking, intermittent, flashing, or moving lights;

(ii) Shall remain fixed for at least 8 seconds;

(iii) Shall not increase the ambient lighting level by more than 0.3 foot candles when measured by a foot candle meter at:

(A) 150 feet for a digital billboard with a surface area of not more than 242 square feet;

(B) 200 feet for a digital billboard with a surface area greater than 242 square feet but not more than 378 square feet;

(C) 250 feet for a digital billboard with a surface area greater than 378 square feet but not more than 672 square feet; and

(D) 350 feet for a digital billboard with a surface area greater than 672 square feet.

(b) In no case shall a digital billboard increase the ambient lighting level by more than 0.3 foot candles at the property line of a single family dwelling located in a zoned district in which billboards are prohibited.

(c) Each digital billboard shall have a light sensing device to adjust the brightness as ambient light conditions change to conform to the requirements of this section.

(d) Transitions between messages shall be accomplished in 2 seconds or less by employing an immediate, dissolve, or fade method.

Notes

045-16 Wyo. Code R. §§ 16-4