14 CFR Part 23 - AIRWORTHINESS STANDARDS: NORMAL, UTILITY, ACROBATIC, AND COMMUTER CATEGORY AIRPLANES

This special condition is for the Pilatus Aircraft Limited PC-12, PC-12/45, and PC-12/47 airplanes. These airplanes, as modified by Innovative Solutions & Support, Inc., will have a novel or unusual design feature associated with the use of an autothrust system. The applicable airworthiness regulations do not contain adequate or appropriate safety standards for this design feature. This special condition contains the additional safety standards the Administrator considers necessary to establish a level of safety equivalent to that established by the existing airworthiness standards.

These special conditions are issued for the Viking Air, Ltd., models DHC-6-100/-200/-300, Twin Otter, Turbopropeller airplanes. This airplane, as modified by Avmax Aviation Services, Inc., will have a novel or unusual design feature associated with the use of a replacement option of a lithium battery instead of nickel-cadmium and lead-acid rechargeable batteries. The applicable airworthiness regulations do not contain adequate or appropriate safety standards for this design feature. These special conditions contain the additional safety standards that the Administrator considers necessary to establish a level of safety equivalent to that established by the existing airworthiness standards.

This action proposes a special condition for the Pilatus Aircraft Limited PC-12, PC-12/45, and PC-12/47 airplanes. These airplanes, as modified by Innovative Solutions & Support, Inc., will have a novel or unusual design feature associated with the use of an autothrust system. The applicable airworthiness regulations do not contain adequate or appropriate safety standards for this design feature. This proposed special condition contains the additional safety standards the Administrator considers necessary to establish a level of safety equivalent to that established by the existing airworthiness standards.

On December 13, 2016, the Federal Aviation Administration (FAA) published a final rule to permit operators to use an enhanced flight vision system in lieu of natural vision to continue descending from 100 feet above the touchdown zone elevation to the runway and to land on certain straight-in instrument approach procedures under instrument flight rules. The FAA is delaying the effective date of this final rule.

These special conditions are issued for the Cessna Aircraft Company model 525 airplane. This airplane as modified by Cranfield Aerospace Limited will have a novel or unusual design feature associated with the installation of a Tamarack Active Technology Load Alleviation System and Cranfield Winglets. The applicable airworthiness regulations do not contain adequate or appropriate safety standards for this design feature. These special conditions contain the additional safety standards the Administrator considers necessary to establish a level of safety equivalent to that established by the existing airworthiness standards.

The FAA amends its airworthiness standards for normal, utility, acrobatic, and commuter category airplanes by replacing current prescriptive design requirements with performance-based airworthiness standards. These standards also replace the current weight and propulsion divisions in small airplane regulations with performance- and risk-based divisions for airplanes with a maximum seating capacity of 19 passengers or less and a maximum takeoff weight of 19,000 pounds or less. These airworthiness standards are based on, and will maintain, the level of safety of the current small airplane regulations, except for areas addressing loss of control and icing, for which the safety level has been increased. The FAA adopts additional airworthiness standards to address certification for flight in icing conditions, enhanced stall characteristics, and minimum control speed to prevent departure from controlled flight for multiengine airplanes. This rulemaking is in response to the Congressional mandate set forth in the Small Airplane Revitalization Act of 2013.

This action proposes special conditions for the Cessna Aircraft Company model 525 airplane. This airplane as modified by Cranfield Aerospace Limited will have a novel or unusual design features associated with the installation of a Tamarack Active Technology Load Alleviation System and Cranfield Winglets. These design features will include winglets and an Active Technology Load Alleviation System. The applicable airworthiness regulations do not contain adequate or appropriate safety standards for this design feature. These proposed special conditions contain the additional safety standards the Administrator considers necessary to establish a level of safety equivalent to that established by the existing airworthiness standards.

These special conditions are issued for the Pilatus Aircraft, Ltd., Model PC-12, PC-12/45, and PC-12/47 airplanes. This airplane as modified by Finnoff Aviation will have a novel or unusual design feature associated with the installation of a rechargeable lithium battery. The applicable airworthiness regulations do not contain adequate or appropriate safety standards for this design feature. These special conditions contain the additional safety standards that the Administrator considers necessary to establish a level of safety equivalent to that established by the existing airworthiness standards.

These special conditions are issued for the Beechcraft, Model A36, Bonanza airplane. This airplane, as modified by Avionics Design Services, Ltd., will have a novel or unusual design feature associated with the use of a replacement option of a lithium battery instead of nickel-cadmium and lead-acid rechargeable batteries. The applicable airworthiness regulations do not contain adequate or appropriate safety standards for this design feature. These special conditions contain the additional safety standards that the Administrator considers necessary to establish a level of safety equivalent to that established by the existing airworthiness standards.

These special conditions are issued for the installation of an inflatable four-point restraint safety belt with an integrated airbag device at the pilot and copilot seats on the DAHER-SOCATA, Model TBM 700 airplane. These airplanes, as modified by the installation of these inflatable safety belts, will have novel and unusual design features associated with the upper-torso restraint portions of the four-point safety belts, which contain an integrated airbag device. The applicable airworthiness regulations do not contain adequate or appropriate safety standards for this design feature. These special conditions contain the additional safety standards that the Administrator considers necessary to establish a level of safety equivalent to that established by the existing airworthiness standards.

This action proposes special conditions for the Pilatus Aircraft, Ltd., Model PC-12, PC-12/45, and PC-12/47 airplanes. This airplane as modified by Finnoff Aviation will have a novel or unusual design feature associated with the installation of a rechargeable lithium battery. The applicable airworthiness regulations do not contain adequate or appropriate safety standards for this design feature. These proposed special conditions contain the additional safety standards that the Administrator considers necessary to establish a level of safety equivalent to that established by the existing airworthiness standards.

These special conditions are issued for the Cirrus Design Corporation (Cirrus), model SF50 airplane. This airplane will have a novel or unusual design feature(s) associated with a whole airplane parachute recovery system. The applicable airworthiness regulations do not contain adequate or appropriate safety standards for this design feature. These special conditions contain the additional safety standards that the Administrator considers necessary to establish a level of safety equivalent to that established by the existing airworthiness standards.

These special conditions are issued for the Kestrel Aircraft Company, Model K-350 Turboprop airplane. This airplane will have a novel or unusual design feature associated with the installation of a rechargeable lithium battery. The applicable airworthiness regulations do not contain adequate or appropriate safety standards for this design feature. These special conditions contain the additional safety standards that the Administrator considers necessary to establish a level of safety equivalent to that established by the existing airworthiness standards.

These special conditions are issued for the Cessna Aircraft Company, Models 208 and 208B Caravan airplanes. This airplane, as modified by Peregrine, will have a novel or unusual design feature associated with the use of a replacement option of a lithium battery instead of nickel-cadmium (Ni-Cd) and lead-acid rechargeable batteries. The applicable airworthiness regulations do not contain adequate or appropriate safety standards for this design feature. These special conditions contain the additional safety standards that the Administrator considers necessary to establish a level of safety equivalent to that established by the existing airworthiness standards.

The FAA announces public meeting on its proposal to revise Part 23 Airworthiness Standards for Normal, Utility, Acrobatic, and Commuter Category Airplanes. The purpose of the public meeting is for the FAA to explain and answer questions concerning the language related to its Notice of Proposed Rulemaking (NPRM) (81 FR 13452, March 14, 2016).

This action proposes special conditions for the Cirrus Design Corporation (Cirrus), model SF50 airplane. This airplane will have a novel or unusual design feature(s) associated with a whole airplane parachute recovery system. The applicable airworthiness regulations do not contain adequate or appropriate safety standards for this design feature. These proposed special conditions contain the additional safety standards that the Administrator considers necessary to establish a level of safety equivalent to that established by the existing airworthiness standards.

The FAA proposes to amend its airworthiness standards for normal, utility, acrobatic, and commuter category airplanes by removing current prescriptive design requirements and replacing them with performance-based airworthiness standards. The proposed standards would also replace the current weight and propulsion divisions in small airplane regulations with performance- and risk-based divisions for airplanes with a maximum seating capacity of 19 passengers or less and a maximum takeoff weight of 19,000 pounds or less. The proposed airworthiness standards are based on, and would maintain, the level of safety of the current small airplane regulations. Finally, the FAA proposes to adopt additional airworthiness standards to address certification for flight in icing conditions, enhanced stall characteristics, and minimum control speed to prevent departure from controlled flight for multiengine airplanes. This notice of proposed rulemaking addresses the Congressional mandate set forth in the Small Airplane Revitalization Act of 2013.

These special conditions are issued for the Cirrus Aircraft Corporation Model SF50 airplane. This airplane will have a novel or unusual design feature(s) associated with installation of an Auto Throttle System. The applicable airworthiness regulations do not contain adequate or appropriate safety standards for this design feature. These special conditions contain the additional safety standards that the Administrator considers necessary to establish a level of safety equivalent to that established by the existing airworthiness standards.

This action proposes special conditions for the Kestrel Aircraft Company, Model K-350 Turboprop airplane. This airplane will have a novel or unusual design feature associated with the installation of a rechargeable lithium battery. The applicable airworthiness regulations do not contain adequate or appropriate safety standards for this design feature. These proposed special conditions contain the additional safety standards that the Administrator considers necessary to establish a level of safety equivalent to that established by the existing airworthiness standards.

These special conditions are issued for the Honda Aircraft Company HA-420 airplane. This airplane will have a novel or unusual design feature(s) associated with the use of a cruise speed control system. The applicable airworthiness regulations do not contain adequate or appropriate safety standards for this design feature. These special conditions contain the additional safety standards that the Administrator considers necessary to establish a level of safety equivalent to that established by the existing airworthiness standards.

These special conditions are issued for the Korea Aerospace Industries, Ltd., Model K-100 airplane. This airplane will have a novel or unusual design feature(s) associated with the use of an electronic engine control system instead of a traditional mechanical control system. The applicable airworthiness regulations do not contain adequate or appropriate safety standards for this design feature. These special conditions contain the additional safety standards that the Administrator considers necessary to establish a level of safety equivalent to that established by the existing airworthiness standards.

This action proposes special conditions for the Cirrus Aircraft Corporation Model SF50 airplane. This airplane will have a novel or unusual design feature(s) associated with installation of an Auto Throttle System. The applicable airworthiness regulations do not contain adequate or appropriate safety standards for this design feature. These proposed special conditions contain the additional safety standards that the Administrator considers necessary to establish a level of safety equivalent to that established by the existing airworthiness standards.

This action reopens the comment period for the regulatory evaluation associated with the FAA's June 11, 2013 Notice of Proposed Rulemaking (NPRM), Revisions to Operational Requirements for the Use of Enhanced Flight Vision Systems (EFVS) and to Pilot Compartment View Requirements for Vision Systems. The regulatory evaluation associated with the NPRM was not posted to the docket prior to the close of the comment period. Therefore, the FAA is reopening the comment period to allow the public the opportunity to adequately analyze the full regulatory evaluation for the NPRM. The FAA will accept comments on the regulatory evaluation only; and not on the regulatory changes proposed in the NPRM.

These special conditions are issued for the Honda Aircraft Company, Model HA-420 airplane. This airplane will have a novel or unusual design feature associated with high altitude operations above 41,000 feet. The applicable airworthiness regulations do not contain adequate or appropriate safety standards for this design feature. These special conditions contain the additional safety standards that the Administrator considers necessary to establish a level of safety equivalent to that established by the existing airworthiness standards.

These special conditions are issued for the Honda Aircraft Company model HA-420 airplane. This airplane will have a novel or unusual design feature associated with mounting the engines on the wings in close proximity to the aft fuselage. The applicable airworthiness regulations do not contain adequate or appropriate safety standards for this design feature. These special conditions contain the additional safety standards that the Administrator considers necessary to establish a level of safety equivalent to that established by the existing airworthiness standards.

The FAA is withdrawing a previously published document granting special conditions for the Cirrus Design Corporation model SF50 airplane. We are withdrawing Special Condition No. 23-246-SC through mutual agreement with Cirrus Design Corporation.

This action proposes special conditions for the Honda Aircraft Company, Model HA-420 airplane. This airplane will have a novel or unusual design feature associated with the installation of lithium-ion (Li-ion) batteries. The applicable airworthiness regulations do not contain adequate or appropriate safety standards for this design feature. These proposed special conditions contain the additional safety standards that the Administrator considers necessary to establish a level of safety equivalent to that established by the existing airworthiness standards.

These special conditions are issued for the Extra EA-300/LC airplane. This airplane will have a novel or unusual design feature(s) associated with static stability. This airplane can perform at the highest level of aerobatic competition. To be competitive, the aircraft was designed with positive and, at some points, neutral stability within its flight envelope. Its lateral and directional axes are also decoupled from each other providing more precise maneuvering. The applicable airworthiness regulations do not contain adequate or appropriate safety standards for these design features. These special conditions contain the additional safety standards that the Administrator considers necessary to establish a level of safety equivalent to that established by the existing airworthiness standards to EA-300/LC airplanes certified solely in the acrobatic category.

This action proposes special conditions for the Extra EA-300/LC airplane. This airplane will have a novel or unusual design feature(s) associated with static stability. This airplane can perform at the highest level of aerobatic competition. To be competitive, the aircraft was designed with positive and, at some points, neutral stability within its flight envelope. Its lateral and directional axes are also decoupled from each other providing more precise maneuvering. The applicable airworthiness regulations do not contain adequate or appropriate safety standards for these design features. These proposed special conditions contain the additional safety standards that the Administrator considers necessary to establish a level of safety equivalent to that established by the existing airworthiness standards to EA-300/LC airplanes certified solely in the acrobatic category.

These special conditions are issued for the Eclipse EA500 airplane. This airplane as modified by Innovative Solutions and Support (IS&S) will have a novel or unusual design feature(s) associated with the autothrottle system (ATS). The applicable airworthiness regulations do not contain adequate or appropriate safety standards for this design feature. These special conditions contain the additional safety standards that the Administrator considers necessary to establish a level of safety equivalent to that established by the existing airworthiness standards.

These special conditions are issued for the Cirrus Design Corporation (Cirrus), model SF50. This airplane will have novel and unusual design features associated with installation of an inflatable three-point restraint safety belt with an integrated airbag device at the pilot and co-pilot seats to include optional installations at other passenger seat locations. The applicable airworthiness regulations do not contain adequate or appropriate safety standards for this design feature. These special conditions contain the additional safety standards that the Administrator considers necessary to establish a level of safety equivalent to that established by the existing airworthiness standards.

This action extends the comment period for an NPRM that was published on June 11, 2013. In that document, the FAA proposed to permit operators to use an EFVS in lieu of natural vision to continue descending from 100 feet height above runway touchdown zone elevation and land on certain straight-in instrument approach procedures under instrument flight rules. This rule would also permit certain operators using EFVS-equipped aircraft to dispatch, release, or takeoff under instrument flight rules (IFR), and to initiate and continue an approach, when the destination airport weather is below authorized visibility minimums for the runway of intended landing. Pilot training, recent flight experience, and proficiency would be required for operators who use EFVS in lieu of natural vision to descend below decision altitude, decision height, or minimum descent altitude. EFVS-equipped aircraft conducting operations to touchdown and rollout would be required to meet additional airworthiness requirements. This rule would also revise pilot compartment view certification requirements for all vision systems. Given the technical complexity of the NPRM, Dassault-Aviation has requested that the FAA extend the comment period to October 15, 2013 to allow time to adequately analyze the NPRM and provide meaningful comments.

These special conditions are issued for the Cessna Aircraft Company (Cessna) Model J182T airplane. This airplane will have a novel or unusual design feature(s) associated with the installation of an aircraft diesel engine (ADE). The applicable airworthiness regulations do not contain adequate or appropriate safety standards for this design feature. These special conditions contain the additional safety standards that the Administrator considers necessary to establish a level of safety equivalent to that established by the existing airworthiness standards.

This action proposes special conditions for the Eclipse EA500 airplane. This airplane as modified by Innovative Solutions and Support (IS&S) will have a novel or unusual design feature(s) associated with the autothrottle system (ATS). The applicable airworthiness regulations do not contain adequate or appropriate safety standards for this design feature. These proposed special conditions contain the additional safety standards that the Administrator considers necessary to establish a level of safety equivalent to that established by the existing airworthiness standards.

These special conditions are issued for the Cessna Aircraft Company (Cessna) Model J182T airplane. This airplane will have a novel or unusual design feature(s) associated with the installation of an electronic engine control. The applicable airworthiness regulations do not contain adequate or appropriate safety standards for this design feature. These special conditions contain the additional safety standards that the Administrator considers necessary to establish a level of safety equivalent to that established by the existing airworthiness standards.

The FAA is withdrawing a previously published notice granting special conditions for the Cirrus Design Corporation model SF50 airplane. We are withdrawing Special Condition No. 23-248-SC through mutual agreement with Cirrus Design Corporation.

The FAA is withdrawing a previously published notice granting special conditions for the Cirrus Design Corporation model SF50 airplane. We are withdrawing Special Condition No. 23-245-SC through mutual agreement with Cirrus Design Corporation.

The FAA is proposing to permit operators to use an Enhanced Flight Vision System (EFVS) in lieu of natural vision to continue descending from 100 feet above the touchdown zone elevation to the runway and land on certain straight-in instrument approach procedures under instrument flight rules (IFR). This proposal would also permit certain operators using EFVS-equipped aircraft to dispatch, release, or takeoff under IFR, and to initiate and continue an approach, when the destination airport weather is below authorized visibility minimums for the runway of intended landing. Under this proposal, pilot training, recent flight experience, and proficiency would be required for operators who use EFVS in lieu of natural vision to descend below decision altitude, decision height, or minimum descent altitude. EFVS-equipped aircraft conducting operations to touchdown and rollout would be required to meet additional airworthiness requirements. This proposal would also revise pilot compartment view certification requirements for vision systems using a transparent display surface located in the pilot's outside view. The proposal would take advantage of advanced vision capabilities thereby achieving the NextGen goals of increasing access, efficiency, and throughput at many airports when low visibility is the limiting factor. Additionally, it would enable EFVS operations in reduced visibilities on a greater number of approach procedure types while maintaining an equivalent level of safety.