Jump to navigation
This is a list of United States Code sections, Statutes at Large, Public Laws, and Presidential Documents, which provide rulemaking authority for this CFR Part.
This list is taken from the Parallel Table of Authorities and Rules provided by GPO [Government Printing Office].
It is not guaranteed to be accurate or up-to-date, though we do refresh the database weekly. More limitations on accuracy are described at the GPO site.
§ 106 - Federal Aviation Administration
§ 40113 - Administrative
§ 44701 - General requirements
§ 44702 - Issuance of certificates
§ 44704 - Type certificates, production certificates, airworthiness certificates,,11 So in original. and design and production organization certificates
Title 14 published on 09-May-2018 03:57
The following are ALL rules, proposed rules, and notices (chronologically) published in the Federal Register relating to 14 CFR Part 26 after this date.
The FAA Aircraft Certification Service (AIR) and Flight Standards Service (AFS) have reorganized to align with functional organization design concepts. The AIR reorganization included eliminating product directorates and restructuring and re-designating field offices. The AFS reorganization included eliminating geographic regions, realigning headquarters organizations, and restructuring field offices. Currently, various rules in the Code of Federal Regulations refer to specific AIR and AFS offices that are obsolete after the reorganizations. This rule replaces specific references with generic references not dependent on any particular office structure. This rule does not impose any new obligations and is only intended to eliminate any confusion about with whom regulated entities and other persons should interact when complying with these various rules in the future.
The FAA is correcting a final rule published on November 15, 2010. That rule required design approval holders of certain existing airplanes and all applicants for type certificates of future transport category airplanes to establish a limit of validity of the engineering data that supports the structural maintenance program (hereinafter referred to as LOV). It also required that operators of any affected airplane incorporate the LOV into the maintenance program for that airplane. This document corrects errors in codified text of that document.