Jump to navigation
This is a list of United States Code sections, Statutes at Large, Public Laws, and Presidential Documents, which provide rulemaking authority for this CFR Part.
This list is taken from the Parallel Table of Authorities and Rules provided by GPO [Government Printing Office].
It is not guaranteed to be accurate or up-to-date, though we do refresh the database weekly. More limitations on accuracy are described at the GPO site.
§ 352 - Misbranded drugs and devices
§ 360 - Registration of producers of drugs or devices
§ 360i - Records and reports on devices
§ 360j - General provisions respecting control of devices intended for human use
§ 371 - Regulations and hearings
§ 374 - Inspection
Title 21 published on 09-Jun-2018 03:51
The following are ALL rules, proposed rules, and notices (chronologically) published in the Federal Register relating to 21 CFR Part 803 after this date.
The Food and Drug Administration (FDA or Agency) is announcing the availability of the guidance for industry and FDA Staff entitled “Unique Device Identification: Policy Regarding Compliance Dates for Class I and Unclassified Devices; Immediately in Effect Guidance for Industry and Food and Drug Administration Staff.” This guidance describes FDA's intention with respect to the enforcement of unique device identification requirements for certain class I and unclassified devices. FDA does not intend to enforce standard date formatting, labeling, and Global Unique Device Identification Database (GUDID) data submission requirements under Agency regulations for these devices before September 24, 2020. In addition, FDA does not intend to enforce direct mark requirements under an Agency regulation for these devices before September 24, 2022. The policy described in this guidance does not apply to implantable, life-supporting, or life-sustaining devices. The guidance document is immediately in effect, but it remains subject to comment in accordance with the Agency's good guidance practices.
The Food and Drug Administration's (FDA, Agency, or we) Center for Devices and Radiological Health and Center for Biologics Evaluation and Research, is announcing a proposed program for manufacturer reporting of certain device malfunction medical device reports (MDRs) in summary form—the Voluntary Malfunction Summary Reporting Program. This proposed voluntary program reflects goals for streamlining malfunction reporting outlined in the commitment letter agreed to by FDA and industry and submitted to Congress, as referenced in the Medical Device User Fee Amendments Act of 2017 (MDUFA IV Commitment Letter). These goals include permitting manufacturers of devices in certain product codes to report malfunctions on a quarterly basis and in a summary format. In addition, this proposed program reflects FDA's findings from a pilot program the Agency conducted to study summary reporting formats for malfunction MDRs.
The Food and Drug Administration (FDA) is amending its regulation regarding postmarket electronic Medical Device Reporting (eMDR) to address the unintentional removal of certain provisions of the Unique Device Identification (UDI) System regulations and to update the contact information listed in the regulations.
The Food and Drug Administration (FDA) is revising its postmarket medical device reporting regulation and making technical corrections. This final rule requires device manufacturers and importers to submit mandatory reports of individual medical device adverse events, also known as medical device reports (MDRs), to the Agency in an electronic format that FDA can process, review, and archive. Mandatory electronic reporting will improve the Agency's process for collecting and analyzing postmarket medical device adverse event information. Electronic reporting is also available to user facilities, but this rule permits user facilities to continue to submit written reports to FDA. This final rule also identifies changes to the content of required MDRs to reflect reprocessor information collected on the Form FDA 3500A as required by the Medical Device User Fee and Modernization Act of 2002 (MDUFMA).
The Food and Drug Administration (FDA) is issuing a final rule to establish a system to adequately identify devices through distribution and use. This rule requires the label of medical devices to include a unique device identifier (UDI), except where the rule provides for an exception or alternative placement. The labeler must submit product information concerning devices to FDA's Global Unique Device Identification Database (GUDID), unless subject to an exception or alternative. The system established by this rule requires the label and device package of each medical device to include a UDI and requires that each UDI be provided in a plain-text version and in a form that uses automatic identification and data capture (AIDC) technology. The UDI will be required to be directly marked on the device itself if the device is intended to be used more than once and intended to be reprocessed before each use.
The Food and Drug Administration (FDA) is extending the comment period pertaining to information collection issues under the Paperwork Reduction Act of 1995 (the PRA) associated with the proposed rule, Unique Device Identification System, that appeared in the Federal Register of July 10, 2012 (77 FR 40736). The Agency is taking this action in response to requests for an extension to allow interested persons additional time to submit comments.
The Food and Drug Administration (FDA) is proposing to establish a unique device identification system to implement the requirement added to the Federal Food, Drug, and Cosmetic Act (FD&C Act) by section 226 of the Food and Drug Administration Amendments Act of 2007 (FDAAA), Section 226 of FDAAA amended the FD&C Act to add new section 519(f), which directs FDA to promulgate regulations establishing a unique device identification system for medical devices. The system established by this rule would require the label of medical devices and device packages to include a unique device identifier (UDI), except where the rule provides for alternative placement of the UDI or provides an exception for a particular device or type of device such as devices sold over-the-counter and low risk devices. Each UDI would have to be provided in a plain-text version and in a form that uses automatic identification and data capture (AIDC) technology. The UDI would also be required to be directly marked on the device itself for certain categories of devices for which the labeling requirement may not be sufficient, for example, those that remain in use for an extended period of time and devices that are likely to become separated from their labeling. The rule would require the submission of information concerning each device to a database that FDA intends to make public, to ensure that the UDI can be used to adequately identify the device through its distribution and use.