Jump to navigation
This is a list of United States Code sections, Statutes at Large, Public Laws, and Presidential Documents, which provide rulemaking authority for this CFR Part.
This list is taken from the Parallel Table of Authorities and Rules provided by GPO [Government Printing Office].
It is not guaranteed to be accurate or up-to-date, though we do refresh the database weekly. More limitations on accuracy are described at the GPO site.
§ 2461 note - Mode of recovery
§ 3535 - Administrative provisions
§ 5424 - Rules and regulations
Title 24 published on 04-Apr-2017 04:06
The following are ALL rules, proposed rules, and notices (chronologically) published in the Federal Register relating to 24 CFR Part 3282 after this date.
This proposed rule would revise the minimum payments to states approved as State Administrative Agencies (SAAs) under the National Manufactured Housing Construction and Safety Standards Act of 1974 in order to provide for a more equitable guarantee of minimum funding from HUD's appropriation for this program and to avoid the differing per unit payments to the states that have occurred under the present rule. This rule would base the minimum payments to states upon their participation in the production or siting of new manufactured homes, including for new manufactured homes both produced and sited in the same state.
This interim final rule amends HUD's civil monetary penalty regulations by making inflation adjustments as mandated by the Federal Civil Penalties Inflation Adjustment Act Improvements Act of 2015. HUD also removes three obsolete civil monetary penalty regulations previously authorized under statutes for which either HUD no longer has enforcement authority or the program is no longer active. Lastly, HUD makes a technical change to the regulation language implementing the Program Fraud Civil Remedies Act which, due to a typographical error under the last civil money penalty adjustment, failed to include language assigning a penalty for causing a false claim or statement to be made.
This rulemaking proposes to revise the exemption for recreational vehicles that are not self-propelled from HUD's Manufactured Housing Procedural and Enforcement Regulations. This proposed rule is based on a recommendation adopted by the Manufactured Housing Consensus Committee (MHCC) which would define a recreational vehicle as one built on a vehicular structure, not certified as a manufactured home, designed only for recreational use and not as a primary residence or for permanent occupancy, and built and certified in accordance with either the National Fire Protection Association (NFPA) 1192-15 or American National Standards Institute (ANSI) A119.5-09 consensus standards for recreational vehicles. HUD is adopting the MHCC's recommendation but modifying it to require certification with the updated ANSI standard, A119.5-15, and by including a requirement that units claiming the ANSI A119.5-15 exemption prominently display a notice stating that the unit is designed only for recreational use, and not as a primary residence or permanent dwelling.
This final rule establishes a procedure whereby construction of new manufactured housing that is substantially completed in the factory can be completed at the installation site, rather than in the plant. Before this rule, a manufacturer would first be required to obtain HUD approval for on-site completion of each of its designs using the alternate construction provisions of HUD's regulations. This final rule simplifies this process by establishing uniform procedures by which manufacturers may complete construction of their homes at the installation site without having to obtain advance approval from HUD. This final rule applies only to the completion of homes subject to the Manufactured Home Construction and Safety Standards, not to the installation of homes subject to the Model Manufactured Home Installation Standards. Moreover, this final rule would not apply when a major section of a manufactured home is to be constructed on-site.
This final rule amends HUD regulations that establish procedures for manufacturers and others to address reports of problems with manufactured homes. These “Subpart I” regulations establish a system of protections with respect to imminent safety hazards and violations of the federal construction and safety standards, assuring a minimum of formality and delay, while protecting the rights of all parties. This final rule establishes the procedures that manufacturers, retailers, distributors, State Administrative Agencies (SAAs), and primary inspection agencies (PIAs), are required to follow to assure that notification and correction are provided with respect to manufactured homes, when required.