# 40 CFR Appendix III to Part 600, Sample Fuel Economy Label Calculation

## Status message

There is 1 Update appearing in the Federal Register for 40 CFR Part 600. View below or at eCFR (GPOAccess)
prev | next
Appendix III to Part 600 - Sample Fuel Economy Label Calculation

Suppose that a manufacturer called Mizer Motors has a product line composed of eight car lines. Of these eight, four are available with the 3.0 liter, 6 cylinder, sequential multi-point fuel injection, 4-valve per cylinder, and 3-way catalyst engine. These four car lines are:

Ajax
Boredom III
Dodo
Castor (Station Wagon)

A. A car line is defined in subpart A (with additional guidance provided in EPA Advisory Circular 89) as a group of vehicles within a make or division which has a degree of commonality in construction. Car line does not consider any level of decor or opulence and is not generally distinguished by such characteristics as roofline, number of doors, seats, or windows. Station wagons and light duty trucks are, however, identified separately from the remainder of each car line. In other words, a Castor station wagon would be considered a different car line than the normal Castor car line made up of sedans, coupes, etc.

B. The engine considered here is defined as a basic engine in subpart A of this part (with additional guidance provided in EPA Advisory Circular 83A). A basic engine is a unique combination of manufacturer, engine displacement, number of cylinders, fuel system, catalyst usage and other engine and emission control system characteristics specified by the Administrator. A model type is a unique combination of car line, basic engine, and transmission class. Thus Ajax is a car line but Ajax 3.0 liter, 6 cylinder manual four-speed transmission is a model type whereas Ajax 3.0 liter, 6 cylinder automatic three-speed transmission is a different model type.

C. The following calculations provide an example of the procedures described in subpart C of this part for the calculation of vehicle configuration and model type fuel economy values. In order to simplify the presentation, only city fuel economy values are included (as determined by either the derived 5-cycle method or vehicle-specific 5-cycle based method). The procedure is identical for highway and combined fuel economy values.

Step I. Input data as supplied by the manufacturer or as determined from testing conducted by the Administrator.

Manufacturer - Mizer Motors

Basic Engine: (3.0 liter, 6 cylinder, sequential multi-point fuel injection, 4-valve per cylinder, 3-way catalyst).

Test vehicle carline Engine code Trans Inertia weight Axle ratio Harmonically averaged. city MPG Specific label MPG 1 Vehicle config. sales
Ajax 1 M-4 3500 2.73 16.1001 16 15,000
Ajax 2 A-3 3500 2.56 15.9020 16 35,000
Boredom III 4 M-4 4000 3.08 14.2343 14 10,000
Ajax 3 M-4 4000 3.36 15.0000 15 15,000
Boredom III 8 A-3 4000 2.56 13.8138 14 25,000
Boredom III 5 A-3 4500 3.08 13.2203 13 20,000
Castor 5 A-3 5000 3.08 10.6006 11 40,000

1 The vehicle configuration fuel economy values, rounded to the nearest mile per gallon, are the fuel economy values that would be used on specific labels for that vehicle configuration.

Step II. Group vehicle fuel economy and sales data according to base level combinations within this basic engine.

Base level Transmission class Inertia weight Miles per gallon Projected vehicle configuration sales
A Manual-4 3,500 16.1001 15,000
B Automatic-3 3,500 15.9020 35,000
C Manual-4 4,000 14.2343 10,000
C Manual-4 4,000 15.0000 15,000
D Automatic-3 4,000 13.8138 25,000
E Automatic-3 4,500 13.2203 20,000
F Automatic-3 5,000 10.6006 40,000

Step III. Determine base level fuel economy values.

A. For all the base levels except the base level which includes 4,000 pound, manual four-speed transmission data, the base level fuel economy is as noted in Step II since only one vehicle configuration was tested within each of these base levels.

 3,500 lb/M4 transmission 16.1001 mpg. 3,500 lb/A3 transmission 15.9020 mpg. 4,000 lb/A3 transmission 13.8138 mpg. 4,500 lb/A3 transmission 13.2203 mpg. 5,000 lb/A3 transmission 10.6006 mpg.

B. Since data from more than one vehicle configuration are included in the 4,000-pound, manual four-speed transmission base level, this fuel economy is harmonically averaged in proportion to the percentage of total sales of all vehicle configurations tested within that base level represented by each vehicle configuration tested within that base level.

Base level: M4 transmission, 4000 pounds:

Therefore, the 4000 pound, M4 transmission fuel economy is 14.6840 miles per gallon.

Note that the car line of the test vehicle using a given engine makes no difference - only the weight and transmission do.

Step IV. For each model type offered by the manufacturer with that basic engine, determine the sales fraction represented by each inertia weight/transmission class combination and the corresponding fuel economy.

 Ajax M4 0.4000 at 3,500 lb 16.1001 0.6000 at 4,000 lb 14.684 A3 0.3000 at 3,500 lb 15.902 0.7000 at 4,000 lb 13.8138 Dodo M4 0.4000 at 3,500 lb 16.1001 0.6000 at 4,000 lb 14.684 A3 0.3000 at 3,500 lb 15.902 0.7000 at 4,000 lb 13.8138 Boredom III M4 1.0000 at 4,000 lb 14.684 A3 0.2500 at 4,000 lb 13.8138 0.7500 at 4,500 lb 13.2203 Castor A3 0.2000 at 4,500 lb 13.2203 0.8000 at 5,000 lb 10.6006

Step V. Determine fuel economy for each model type (that is, car line/basic engine/transmission class combination).

Ajax, 3.0 liter, 6 cylinder, A3 transmission, model type MPG is calculated as follows:

Similarly, Ajax and Dodo 3.0 liter, 6 cylinder, M4 model type MPG is calculated as follows:

Dodo 3.0 liter, 6 cylinder, A3 model type MPG is calculated as follows:

Boredom III 3.0 liter 6 cylinder M4 model type MPG = 14.6840 mpg, which rounds to 15 mi./gal 1

1 The model type fuel economy values rounded to the nearest mile per gallon, are the fuel economy values listed in the EPA Fuel Economy Guide and used on the general labels (window stickers) for production vehicles for that model year.

Boredom III 3.0 liter, 6 cylinder, A3 model type MPG is calculated as follows:

Castor 3.0 liter, 6 cylinder, A3 model type MPG is calculated as follows:

Note that even though no Dodo was actually tested, this approach permits its fuel economy figure to be estimated, based on the inertia weight distribution of projected Dodo sales within a specific engine and transmission grouping.

[71 FR 77958, Dec. 27, 2006]

This is a list of United States Code sections, Statutes at Large, Public Laws, and Presidential Documents, which provide rulemaking authority for this CFR Part.

This list is taken from the Parallel Table of Authorities and Rules provided by GPO [Government Printing Office].

It is not guaranteed to be accurate or up-to-date, though we do refresh the database weekly. More limitations on accuracy are described at the GPO site.

United States Code
Statutes at Large
Public Laws

Title 40 published on 2015-08-22

The following are ALL rules, proposed rules, and notices (chronologically) published in the Federal Register relating to 40 CFR Part 600 after this date.

• 2016-10-25; vol. 81 # 206 - Tuesday, October 25, 2016
1. 81 FR 73881 - Greenhouse Gas Emissions and Fuel Efficiency Standards for Medium- and Heavy-Duty Engines and Vehicles—Phase 2
GPO FDSys XML | Text
DEPARTMENT OF TRANSPORTATION, ENVIRONMENTAL PROTECTION AGENCY, National Highway Traffic Safety Administration
Final rule.
This final rule is effective on December 27, 2016. The incorporation by reference of certain publications listed in this regulation is approved by the Director of the Federal Register as of December 27, 2016.
40 CFR Parts 9, 22, 85, 86, 600, 1033, 1036, 1037, 1039, 1042, 1043, 1065, 1066, and 1068

Title 40 published on 2015-08-22.

The following are only the Rules published in the Federal Register after the published date of Title 40.

For a complete list of all Rules, Proposed Rules, and Notices view the Rulemaking tab.

• 2016-10-25; vol. 81 # 206 - Tuesday, October 25, 2016
1. 81 FR 73881 - Greenhouse Gas Emissions and Fuel Efficiency Standards for Medium- and Heavy-Duty Engines and Vehicles—Phase 2
GPO FDSys: XML | Text
DEPARTMENT OF TRANSPORTATION, ENVIRONMENTAL PROTECTION AGENCY, National Highway Traffic Safety Administration
Final rule.
This final rule is effective on December 27, 2016. The incorporation by reference of certain publications listed in this regulation is approved by the Director of the Federal Register as of December 27, 2016.
40 CFR Parts 9, 22, 85, 86, 600, 1033, 1036, 1037, 1039, 1042, 1043, 1065, 1066, and 1068