40 CFR Appendix Table 1 to Subpart III of Part 62 - Emission Limitations

Table 1 to Subpart III of Part 62 - Emission Limitations
For the air pollutant You must meet this emission limitation a Using this averaging time And determining compliance using this method
Cadmium 0.004 milligrams per dry standard cubic meter 3-run average (1 hour minimum sample time per run) Performance test (Method 29 of appendix A of part 60).
Carbon monoxide 157 parts per million by dry volume 3-run average (1 hour minimum sample time per run) Performance test (Method 10, 10A, or 10B, of appendix A of part 60).
Dioxins/furans (toxic equivalency basis) 0.41 nanograms per dry standard cubic meter 3-run average (4 hour minimum sample time per run) Performance test (Method 23 of appendix A of part 60).
Hydrogen chloride 62 parts per million by dry volume 3-run average (1 hour minimum sample time per run) Performance test (Method 26A of appendix A of part 60).
Lead 0.04 milligrams per dry standard cubic meter 3-run (1 hour minimum sample time per run) Performance test (Method 29 of appendix A of part 60).
Mercury 0.47 milligrams per dry standard cubic meter 3-run average (1 hour minimum sample time per run) Performance test (Method 29 of appendix A of part 60).
Opacity 10 percent 6-minute averages Performance test (Method 9 of appendix A of part 60).
Oxides of nitrogen 388 parts per million by dry volume 3-run average (1 hour minimum sample time per run) Performance test (Methods 7, 7A, 7C, 7D, or 7E of appendix A of part 60).
Particulate matter 70 milligrams per dry standard cubic meter 3-run average (1 hour minimum sample time per run) Performance test (Method 5 or 29 of appendix A of part 60).
Sulfur dioxide 20 parts per million by dry volume 3-run average (1 hour minimum sample time per run) Performance test (Method 6 or 6c of appendix A of part 60).

a All emission limitations (except for opacity) are measured at 7 percent oxygen, dry basis at standard conditions.