40 CFR Appendix Table 1 to Subpart MMMMM of Part 63, Emission Limits

Table 1 to Subpart MMMMM of Part 63 - Emission Limits

As stated in § 63.8790(a), you must comply with the emission limits in the following table:

For . . . You must . . .
1. Each existing, new, or reconstructed loop slitter adhesive use affected source Not use any HAP-based adhesives.
2. Each new or reconstructed flame lamination affected source Reduce HAP emissions by 90 percent.
3. Each existing flame lamination affected sources There are no emission limits for existing flame lamination sources. However, you must submit an initial notification per § 63.8816(b) .

This is a list of United States Code sections, Statutes at Large, Public Laws, and Presidential Documents, which provide rulemaking authority for this CFR Part.

This list is taken from the Parallel Table of Authorities and Rules provided by GPO [Government Printing Office].

It is not guaranteed to be accurate or up-to-date, though we do refresh the database weekly. More limitations on accuracy are described at the GPO site.

United States Code