40 CFR Appendix Table 2 to Subpart VVVV of Part 63, Alternative Organic HAP Content Requirements for Open Molding Resin and Gel Coat Operations

Table 2 to Subpart VVVV of Part 63 - Alternative Organic HAP Content Requirements for Open Molding Resin and Gel Coat Operations

As specified in §§ 63.5701(b), 63.5704(b)(2), and 63.5713(a), (b), and (d), you must comply with the requirements in the following table:

For this operation - And this application method - You must not exceed this weighted-average organic HAP content (weight percent) requirement -
1. Production resin operations Atomized (spray) 28 percent.
2. Production resin operations Nonatomized (nonspray) 35 percent.
3. Pigmented gel coat operations Any method 33 percent.
4. Clear gel coat operations Any method 48 percent
5. Tooling resin operations Atomized (spray) 30 percent.
6. Tooling resin operations Nonatomized (nonspray) 39 percent.
7. Tooling gel coat operations Any method 40 percent.

This is a list of United States Code sections, Statutes at Large, Public Laws, and Presidential Documents, which provide rulemaking authority for this CFR Part.

This list is taken from the Parallel Table of Authorities and Rules provided by GPO [Government Printing Office].

It is not guaranteed to be accurate or up-to-date, though we do refresh the database weekly. More limitations on accuracy are described at the GPO site.


United States Code