40 CFR Appendix Table 3 to Subpart AAAAAAA of Part 63, Test Methods
|For * * *||You must use * * *|
|1. Selecting the sampling locations a and the number of traverse points||EPA test method 1 or 1A in appendix A to part 60.|
|2. Determining the velocity and volumetric flow rate||EPA test method 2, 2A, 2C, 2D, 2F, or 2G, as appropriate, in appendix A to part 60.|
|3. Determining the gas molecular weight used for flow rate determination||EPA test method 3, 3A, 3B, as appropriate, in appendix A to part 60.|
|4. Measuring the moisture content of the stack gas||EPA test method 4 in appendix A to part 60.|
|5. Measuring the PM emissions||EPA test method 5A in appendix A to part 60.|
|6. Measuring the PAH emissions||EPA test method 23 b with analysis by SW-846 Method 8270D.|
a The sampling locations must be located at the outlet of the process equipment (or control device, if applicable), prior to any releases to the atmosphere.
b When using EPA Method 23, the toluene extraction step specified in section 220.127.116.11 of the method should be omitted.