40 CFR Appendix Table 3 to Subpart KKKK of Part 63, Emission Limits for Affected Sources Using the Control Efficiency/Outlet Concentration Compliance Option

Table 3 to Subpart KKKK of Part 63 - Emission Limits for Affected Sources Using the Control Efficiency/Outlet Concentration Compliance Option

You must comply with the emission limits that apply to your affected source in the following table as required by § 63.3490(d).

If you use the control efficiency/outlet concentration option to comply with the emission limitations for any coating operation(s) . . . Then you must comply with one of the following by using an emissions control system to . . .
1. in a new or reconstructed affected source a. reduce emissions of total HAP, measured as THC (as carbon), a by 97 percent; or
b. limit emissions of total HAP, measured as THC (as carbon), a to 20 ppmvd at the control device outlet and use a PTE.
2. in an existing affected source a. reduce emissions of total HAP, measured as THC (as carbon), a by 95 percent; or
b. limit emissions of total HAP, measured as THC (as carbon), a to 20 ppmvd at the control device outlet and use a PTE.

a You may choose to subtract methane from THC as carbon measurements.

This is a list of United States Code sections, Statutes at Large, Public Laws, and Presidential Documents, which provide rulemaking authority for this CFR Part.

This list is taken from the Parallel Table of Authorities and Rules provided by GPO [Government Printing Office].

It is not guaranteed to be accurate or up-to-date, though we do refresh the database weekly. More limitations on accuracy are described at the GPO site.


United States Code