40 CFR Subpart F - Procedures for Testing Performance Characteristics of Class II Equivalent Methods for PM 2.5
prev next
- § 53.60 General provisions.
- § 53.61 Test conditions.
- § 53.62 Test procedure: Full wind tunnel test.
- § 53.63 Test procedure: Wind tunnel inlet aspiration test.
- § 53.64 Test procedure: Static fractionator test.
- § 53.65 Test procedure: Loading test.
- § 53.66 Test procedure: Volatility test.
- Table F-1 to Subpart F of Part 53 - Performance Specifications for PM 2.5 Class II Equivalent Samplers
- Table F-2 to Subpart F of Part 53 - Particle Sizes and Wind Speeds for Full Wind Tunnel Test, Wind Tunnel Inlet Aspiration Test, and Static Chamber Test
- Table F-3 to Subpart F of Part 53 - Critical Parameters of Idealized Ambient Particle Size Distributions
- Table F-4 to Subpart F of Part 53 - Estimated Mass Concentration Measurement of PM 2.5 for Idealized Coarse Aerosol Size Distribution
- Table F-5 to Subpart F of Part 53 - Estimated Mass Concentration Measurement of PM 2.5 for Idealized “Typical” Coarse Aerosol Size Distribution
- Table F-6 to Subpart F of Part 53 - Estimated Mass Concentration Measurement of PM 2.5 for Idealized Fine Aerosol Size Distribution
- Figure F-1 to Subpart F of Part 53 - Designation Testing Checklist
- Appendix A to Subpart F of Part 53 - References
Source:
62 FR 38814, July 18, 1997, unless otherwise noted.
The following state regulations pages link to this page.