Jump to navigation
This is a list of United States Code sections, Statutes at Large, Public Laws, and Presidential Documents, which provide rulemaking authority for this CFR Part.
This list is taken from the Parallel Table of Authorities and Rules provided by GPO [Government Printing Office].
It is not guaranteed to be accurate or up-to-date, though we do refresh the database weekly. More limitations on accuracy are described at the GPO site.
§ 3306 - Regulations
§ 3307 - Frequency of inspection
Title 46 published on 18-Jan-2018 04:02
The following are ALL rules, proposed rules, and notices (chronologically) published in the Federal Register relating to 46 CFR Part 132 after this date.
The Coast Guard is issuing a final rule for certain design and approval standards for fire protection, detection, extinguishing equipment, and materials on inspected and uninspected vessels, outer continental shelf facilities, deepwater ports, and mobile offshore drilling units. This rule harmonizes Coast Guard approval processes for fire detection and alarm systems, and revises Coast Guard regulations for other types of equipment, materials, and components, such as spanner wrenches, non-metallic pipes, and sprinkler systems. This rule ensures Coast Guard regulations remain current and addresses advances in technology.
The Coast Guard Authorization Act of 2010 (the Act) removed the statutory size limit previously placed on offshore supply vessels (OSVs), and required the Coast Guard to issue regulations to mitigate the risk created as a result, noting the need “to ensure the safe carriage of oil, hazardous substances, and individuals in addition to the crew” on OSVs exceeding the previous size limit. In accordance with the Act, the Coast Guard is issuing this interim rule to ensure the safe carriage of oil, hazardous substances, and individuals other than crew by requiring U.S.-flagged OSVs of at least 6,000 gross tonnage as measured under the Convention Measurement System to comply with existing regulatory requirements and international standards for design, engineering, construction, operations and manning, inspections, and certification. This rule also will affect any vessel of at least 500 gross register tons as measured under the Regulatory Measurement System, if that vessel is not assigned a measurement under the Convention Measurement System and the owner desires to have the vessel certificated as an OSV. The Coast Guard intends to finalize this interim rule after considering, and incorporating to the extent appropriate, any comments from the public.
The Coast Guard proposes to amend its regulations for certain design and approval standards for fire protection, detection, and extinguishing equipment on inspected and uninspected vessels, outer continental shelf facilities, deepwater ports, and mobile offshore drilling units. The proposed amendments would harmonize Coast Guard regulations with appropriate national and international consensus standards; address advances in fire protection technologies and standards; update Coast Guard approval processes for fire detection and alarm systems; and revise Coast Guard regulations for other types of equipment or components, such as spanner wrenches, non-metallic pipes, and sprinkler systems. These proposed changes are necessary to ensure Coast Guard regulations remain current and address advances in technology.
The Coast Guard is amending the current regulations for fire suppression systems on several classes of commercial vessels. The amendments clarify that approved alternatives to carbon dioxide systems may be used to protect some spaces on these vessels, and set general requirements for alternative systems. Additionally, certain new carbon dioxide systems must be equipped with lockout valves and odorizing units to protect persons after a carbon dioxide discharge. By requiring these features on carbon dioxide systems and by making a wider range of fire suppression systems available, the regulations advance the Coast Guard's strategic goals of promoting marine safety and maritime mobility.