49 CFR 178.33-6 - Manufacture.
(a) By appliances and methods that will assure uniformity of completed containers; dirt and scale to be removed as necessary; no defect acceptable that is likely to weaken the finished container appreciably; reasonably smooth and uniform surface finish required.
(b) Seams when used must be as follows:
(1) Circumferential seams: By welding, swedging, brazing, soldering, or double seaming.
(2) Side seams: By welding, brazing, or soldering.
(c) Ends: The ends shall be of pressure design.
Title 49 published on 2015-10-01
The following are ALL rules, proposed rules, and notices (chronologically) published in the Federal Register relating to 49 CFR Part 178 after this date.