49 CFR Part 178 - SPECIFICATIONS FOR PACKAGINGS

The Pipeline and Hazardous Materials Safety Administration (PHMSA) requests information on matters related to the development and potential use of automated technologies for surface modes ( i.e., highway and rail) in hazardous materials transportation. In anticipation of the development, testing, and integration of Automated Driving Systems in surface transportation, PHMSA is issuing this request for information on the factors the Agency should consider to ensure continued safe transportation of hazardous materials without impeding emerging surface transportation technologies.

PHMSA is issuing a final rule to amend the Hazardous Materials Regulations (HMR) to maintain consistency with international regulations and standards by incorporating various amendments, including changes to proper shipping names, hazard classes, packing groups, special provisions, packaging authorizations, air transport quantity limitations, and vessel stowage requirements. These revisions are necessary to harmonize the HMR with recent changes made to the International Maritime Dangerous Goods Code, the International Civil Aviation Organization's Technical Instructions for the Safe Transport of Dangerous Goods by Air, and the United Nations Recommendations on the Transport of Dangerous Goods—Model Regulations. Additionally, PHMSA is adopting several amendments to the HMR that result from coordination with Canada under the U.S.-Canada Regulatory Cooperation Council.

PHMSA is extending the comment period for an advance notice of proposed rulemaking that was published in the Federal Register on January 18, 2017. In response to stakeholder requests, the comment period will be extended for an additional 60 days, from March 20, 2017 to May 19, 2017.

PHMSA is considering revising the Hazardous Materials Regulations (HMR) to establish vapor pressure limits for unrefined petroleum-based products and potentially all Class 3 flammable liquid hazardous materials that would apply during the transportation of the products or materials by any mode. PHMSA is currently assessing the merits of a petition for rulemaking submitted by the Attorney General of the State of New York regarding vapor pressure standards for the transportation of crude oil. The petition requests that PHMSA implement a Reid Vapor Pressure (RVP) limit less than 9.0 pounds per square inch (psi) for crude oil transported by rail. PHMSA will use the comments in response to this ANPRM to help assess and respond to the petition and to evaluate any other potential regulatory actions related to sampling and testing of crude oil and other Class 3 hazardous materials. PHMSA will also evaluate the potential safety benefits and costs of utilizing vapor pressure thresholds within the hazardous materials classification process for unrefined petroleum-based products and Class 3 hazardous materials.

The Pipeline and Hazardous Materials Safety Administration (PHMSA) proposes to amend the Hazardous Materials Regulations (HMR) to maintain consistency with international regulations and standards by incorporating various amendments, including changes to proper shipping names, hazard classes, packing groups, special provisions, packaging authorizations, air transport quantity limitations, and vessel stowage requirements. These revisions are necessary to harmonize the HMR with recent changes made to the International Maritime Dangerous Goods Code, the International Civil Aviation Organization's Technical Instructions for the Safe Transport of Dangerous Goods by Air, and the United Nations Recommendations on the Transport of Dangerous Goods—Model Regulations. Additionally, PHMSA proposes several amendments to the HMR that result from coordination with Canada under the U.S.-Canada Regulatory Cooperation Council.

The Pipeline and Hazardous Materials Safety Administration (PHMSA) is proposing to amend the Hazardous Materials Regulations to revise certain requirements applicable to the manufacture, use, and requalification of DOT-specification cylinders. PHMSA is taking this action in response to petitions for rulemaking submitted by stakeholders and to agency review of the compressed gas cylinders regulations. Specifically, PHMSA is proposing to incorporate by reference or update the references to several Compressed Gas Association publications, amend the filling requirements for compressed and liquefied gases, expand the use of salvage cylinders, and revise and clarify the manufacture and requalification requirements for cylinders.

In response to petitions for rulemaking submitted by the regulated community, PHMSA proposes to amend the Hazardous Materials Regulations (HMR; 49 CFR parts 171 through 180) to update, clarify, or provide relief from miscellaneous regulatory requirements. Specifically, PHMSA is proposing amendments that include, but are not limited to, the following: Incorporating by Reference (IBR) multiple publications from both the Compressed Gas Association (CGA) and the Chlorine Institute; addressing inconsistencies with domestic and international labels and placards; permitting alternative testing for aerosols; no longer mandating that excepted quantities comply with the emergency response telephone requirement; allowing electronic signatures for Environmental Protection Agency (EPA) manifest forms; and no longer requiring the service pressure to be marked on Department of Transportation (DOT) 8 and 8L cylinders.

In this final rule, the Pipeline and Hazardous Materials Safety Administration (PHMSA) is amending the Hazardous Materials Regulations (HMR) to make miscellaneous amendments in order to update and clarify certain regulatory requirements. These amendments are designed to promote safer transportation practices, address petitions for rulemaking, respond to National Transportation Safety Board (NTSB) Safety Recommendations, facilitate international commerce, make editorial corrections, and simplify the regulations. The amendments in this rulemaking include, but are not limited to, removing the packing group (PG) II designation for certain organic peroxides, self-reactive substances, and explosives; incorporating requirements for trailers of manifolded acetylene cylinders; providing requirements to allow for shipments of damaged wet electric batteries; and revising the requirements for the packaging of nitric acid, testing of pressure relief devices on cargo tanks, and shipments of black or smokeless powder for small arms.

As required by the Moving Ahead for Progress in the 21st Century Act (MAP-21), the Pipeline and Hazardous Materials Safety Administration is amending the Hazardous Materials Regulations to adopt provisions contained in certain widely-used or long-standing special permits that have an established safety record. The adopted amendments are intended to provide wider access to the regulatory flexibility offered in special permits and eliminate the need for numerous renewal requests. The adopted amendments will also reduce paperwork burdens and facilitate commerce while maintaining an appropriate level of safety. PHMSA conducted an extensive analysis of all active special permits and codified, as appropriate, those special permits deemed suitable in this rulemaking.

This final rule corrects editorial errors, makes minor regulatory changes and, in response to requests for clarification, improves the clarity of certain provisions in the Hazardous Materials Regulations. The intended effect of this rule is to enhance the accuracy and reduce misunderstandings of the regulations. The amendments contained in this rule are non-substantive changes and do not impose new requirements.

As required by the Moving Ahead for Progress in the 21st Century Act (MAP-21), the Pipeline and Hazardous Materials Safety Administration is proposing to amend the Hazardous Materials Regulations to adopt provisions contained in certain widely-used or long-standing special permits that have an established safety record. The proposed revisions are intended to provide wider access to the regulatory flexibility offered in special permits and eliminate the need for numerous renewal requests, thus reducing paperwork burdens and facilitating commerce while maintaining an appropriate level of safety. PHMSA conducted an extensive analysis of all active special permits and, in this rulemaking, those special permits deemed suitable are being proposed for adoption. PHMSA is inviting all interested persons to provide comments on both those special permits deemed suitable and proposed to be adopted into the HMR and those that are deemed not suitable for adoption. In addition, PHMSA is also requesting comments on a proposed requirement for special permit applicants to include regulatory text in their applications, when appropriate.

PHMSA proposes to make miscellaneous amendments to the Hazardous Materials Regulations to update and clarify certain regulatory requirements. These proposed amendments are designed to promote safer transportation practices, address petitions for rulemaking, respond to National Transportation Safety Board (NTSB) Safety Recommendations, facilitate international commerce, make editorial corrections, and simplify the regulations. The proposed provisions in this rulemaking include, but are not limited to, removing the packing group (PG) II designation for certain organic peroxides, self-reactive substances and explosives, incorporating requirements for trailers of manifolded acetylene cylinders, and providing requirements to allow for shipments of damaged wet electric batteries. In addition, this rulemaking proposes to revise the requirements for the packaging of nitric acid, testing of pressure relief devices on cargo tanks, and shipments of black or smokeless powder for small arms.

PHMSA is amending the Hazardous Materials Regulations to maintain alignment with international standards by incorporating various amendments, including changes to proper shipping names, hazard classes, packing groups, special provisions, packaging authorizations, air transport quantity limitations, and vessel stowage requirements. These revisions are necessary to harmonize the Hazardous Materials Regulations with recent changes made to the International Maritime Dangerous Goods (IMDG) Code, the International Civil Aviation Organization's Technical Instructions (ICAO TI) for the Safe Transport of Dangerous Goods by Air, the United Nations Recommendations on the Transport of Dangerous Goods (UN Model Regulations) and subsequently address three petitions for rulemaking.

PHMSA proposes to amend the Hazardous Materials Regulations to maintain alignment with international standards by incorporating various amendments, including changes to proper shipping names, hazard classes, packing groups, special provisions, packaging authorizations, air transport quantity limitations, and vessel stowage requirements. These revisions are necessary to harmonize the Hazardous Materials Regulations with recent changes made to the International Maritime Dangerous Goods Code, the International Civil Aviation Organization's Technical Instructions for the Safe Transport of Dangerous Goods by Air, the United Nations Recommendations on the Transport of Dangerous Goods—Model Regulations and subsequently address three petitions for rulemaking.

PHMSA, in coordination with the Nuclear Regulatory Commission (NRC), is amending requirements in the Hazardous Materials Regulations (HMR) governing the transportation of Class 7 (radioactive) materials based on recent changes contained in the International Atomic Energy Agency (IAEA) publication “Regulations for the Safe Transport of Radioactive Material, 2009 Edition, IAEA Safety Standards Series No. TS-R-1.” The purposes of this rulemaking are to harmonize requirements of the HMR with international standards for the transportation of Class 7 (radioactive) materials and update, clarify, correct, or provide relief from certain regulatory requirements applicable to the transportation of Class 7 (radioactive) materials.

The Pipeline and Hazardous Materials Safety Administration is amending the Hazardous Materials Regulations (HMR) to adopt provisions contained in certain widely used or longstanding special permits and certain competent authority approvals (“approvals”) that have established safety records. Special permits allow a company or individual to package or ship a hazardous material in a manner that varies from the regulations provided an equivalent level of safety is maintained. An approval is a written consent (document) required under an international standard (i.e., International Maritime Dangerous Goods (IMDG) Code, International Civil Aviation Organization's Technical Instructions for the Safe Transport of Dangerous Goods by Air (ICAO TI)), or is specifically provided for in the HMR, and is issued by the Associate Administrator for Hazardous Materials Safety. These revisions are intended to provide wider access to the regulatory flexibility offered in special permits and approvals and eliminate the need for numerous renewal requests, reducing paperwork burdens and facilitating commerce while maintaining an appropriate level of safety.

PHMSA is notifying the public of our intent to extend the comment period by thirty days for a notice of proposed rulemaking published on December 30, 2013.

PHMSA is proposing to amend the Hazardous Materials Regulations applicable to the design, construction, certification, recertification and maintenance of cargo tank motor vehicles, cryogenic portable tanks and multi-unit tank car tanks (ton tanks) in response to petitions for rulemaking from the American Society of Mechanical Engineers (ASME), the National Board of Boiler and Pressure Vessel Inspectors (National Board), and the Pressure Vessel Manufacturers Association (PVMA). Specifically, this NPRM proposes to allow the use of the 2013 edition of the ASME's Boiler and Pressure Vessel Code, Section XII (Section XII) for the design, construction, and certification of cargo tank motor vehicles, cryogenic portable tanks and ton tanks. PHMSA also proposes to authorize the use of the 2013 edition of the National Board of Boiler and Pressure Vessel Inspectors' National Board Inspection Code (NBIC), as it applies to the continuing qualification and maintenance of ASME constructed cargo tank motor vehicles, cryogenic portable tanks, and ton tanks constructed to standards in ASME's Section XII, and existing cargo tank motor vehicles and portable tanks constructed to Section VIII, Division 1. If adopted, these amendments will allow for regulatory flexibility, without compromising safety.

PHMSA is notifying the public of our intent to extend the comment period by 30 days for a notice of proposed rulemaking published on September 6, 2013.

This final rule corrects editorial errors and amends certain requirements in response to administrative appeals submitted by persons affected by certain final rules published in the Federal Register .

This final rule corrects editorial errors, makes minor regulatory changes and, in response to requests for clarification, improves the clarity of certain provisions in the Hazardous Materials Regulations (HMR). The intended effect of this rule is to enhance the accuracy and reduce misunderstandings of the regulations. The amendments contained in this rule are non-substantive changes and do not impose new requirements.

PHMSA is considering revisions to the Hazardous Materials Regulations (HMR) to improve the regulations applicable to the transportation of hazardous materials by rail. The revisions are based on eight petitions received from the regulated community and four National Transportation Safety Board (NTSB) Recommendations which are referenced by a petition. In this ANPRM, we outline the petitions and NTSB recommendations, identify a preliminary estimate of costs and benefits from the petitions, pose several questions, and solicit comments and data from the public. Under Executive Order 13563, Federal agencies were asked to periodically review existing regulations. The questions posed in this ANPRM and responses by commenters will be used in conjunction with a retrospective review of existing requirements aimed to modify, streamline, expand, or repeal existing rules that are outmoded, ineffective, insufficient, or excessively burdensome.

PHMSA is amending the Hazardous Materials Regulations (HMR) to make miscellaneous amendments to update and clarify certain regulatory requirements. These amendments promote safer transportation practices, eliminate unnecessary regulatory requirements, address a petition for rulemaking, incorporate a special permit into the HMR, facilitate international commerce, and simplify the regulations. These amendments also update various entries in the Hazardous Materials Table (HMT) and corresponding special provisions, clarify the lab pack requirements for temperature-controlled materials, and require hazmat employers to make hazmat employee training records available upon request to an authorized official of the Department of Transportation (DOT) or an entity explicitly granted authority to enforce the HMR.

PHMSA is amending the Hazardous Materials Regulations in response to petitions for rulemaking submitted by the regulated community to update, clarify, or provide relief from miscellaneous regulatory requirements. Specifically, PHMSA is amending the recordkeeping and package marking requirements for third-party labs and manufacturers to assure the traceability of packaging; removing the listing for “NA1203, Gasohol, gasoline mixed with ethyl alcohol, with not more than 10% alcohol”; harmonizing internationally and providing a limited quantity exception for Division 4.1, Self-reactive solids and Self-reactive liquids Types B through F; allowing smokeless powder classified as a Division 1.4C material to be reclassified as a Division 4.1 material; and providing greater flexibility by allowing the Dangerous Cargo Manifest to be in locations designated by the master of the vessel besides “on or near the vessel's bridge” while the vessel is in a United States port.

The Pipeline and Hazardous Materials Safety Administration is proposing to amend the Hazardous Materials Regulations to incorporate provisions contained in certain widely used or longstanding special permits and certain competent authority approvals (“approvals”) that have established safety records. Special permits allow a company or individual to package or ship a hazardous material in a manner that varies from the regulations provided an equivalent level of safety is maintained. An approval is a written consent (document) required under an international standard (i.e., International Maritime Dangerous Goods (IMDG) Code, International Civil Aviation Organization (ICAO)), or is specifically provided for in the HMR, and is issued by the Associate Administrator for Hazardous Materials Safety. These proposed revisions are intended to provide wider access to the regulatory flexibility offered in special permits and approvals and eliminate the need for numerous renewal requests, reducing paperwork burdens and facilitating commerce while maintaining an appropriate level of safety. Additionally, this rulemaking will address three petitions for rulemaking regarding the continued use of renewal applications for long standing special permits.

This final rule corrects editorial errors, makes minor regulatory changes and, in response to requests for clarification, improves the clarity of certain provisions in the Hazardous Materials Regulations. The intended effect of this rule is to enhance the accuracy and reduce misunderstandings of the regulations. The amendments contained in this rule are non-substantive changes and do not impose new requirements.

PHMSA proposes to amend the Hazardous Materials Regulations to maintain alignment with international standards by incorporating various amendments, including changes to proper shipping names, hazard classes, packing groups, special provisions, packaging authorizations, air transport quantity limitations, and vessel stowage requirements. These revisions are necessary to harmonize the Hazardous Materials Regulations with recent changes made to the International Maritime Dangerous Goods Code, the International Civil Aviation Organization's Technical Instructions for the Safe Transport of Dangerous Goods by Air, and the United Nations Recommendations on the Transport of Dangerous Goods—Model Regulations and subsequently address a petition for rulemaking.

PHMSA is publishing this ANPRM to identify ways to reduce the regulatory burden for persons who ship consumer products containing hazardous materials in the “reverse logistics” supply chain. Reverse logistics is the process that is initiated when a consumer product goes backwards in the distribution chain. It may be initiated by the consumer, the retailer, or anyone else in the chain. Therefore, the process may involve consumers, retailers, manufacturers, and even disposal facilities. Following this ANPRM, PHMSA anticipates publishing an NPRM that will propose to simplify the regulations for reverse logistics shipments and provide avenue means for regulatory compliance that maintains transportation safety. This action is part of DOT's retrospective plan under EO 13563 completed in August 2011 DOT's plan is available at: http://www.dot.gov/open/docs/dot-final-rrr-plan-08-23-2011.pdf . To fully engage the broad spectrum of stakeholders affected by reverse logistics, this ANPRM solicits comments and input on several questions in the context of reverse logistics. Any comments, data, and information received will be used to evaluate and shape the proposals in the NPRM.

The Pipeline and Hazardous Materials Safety Administration (PHMSA) is considering amendments to the Hazardous Materials Regulations (HMR) to revise certain requirements applicable to the manufacture, use, and requalification of DOT specification cylinders. PHMSA is taking this action in response to petitions for rulemaking submitted by the regulated community and a review of the regulations applicable to compressed gas cylinders. PHMSA is not proposing specific amendments to the HMR; rather, we are seeking comment on the issues discussed in the ANPRM. While this ANPRM focuses on specific petitions for rulemaking and special permits, we will accept comments on the HMR applicable to compressed gas cylinders. These comments will be combined with a retrospective review of existing requirements aimed to modify, streamline, expand, or repeal existing rules that are outmoded, ineffective, insufficient, or excessively burdensome.

This document responds to administrative appeals and solicits public comment on proposals generated as a result of certain amendments adopted in an international harmonization final rule published in the Federal Register . The final rule amended the Hazardous Materials Regulations (HMR) by revising, removing or adding proper shipping names, the hazard class of a material, packing group assignments, special provisions, packaging authorizations, packaging sections, air transport quantity limitations, and vessel stowage requirements. The amendments were necessary to align the HMR with recent revisions to international standards for the transport of hazardous materials by all modes. In this notice, PHMSA proposes to amend the HMR as a result of administrative appeals submitted in response to various amendments adopted in the January 19, 2011 final rule. This document also addresses recent actions taken by the International Civil Aviation Organization's (ICAO) Dangerous Goods Panel (DGP) regarding certain lithium ion battery-powered mobility aids (e.g., wheelchairs, travel scooters) offered by passengers for air transport. Further, this notice proposes amendments to the HMR as a result of two administrative appeals submitted by an appellant in response to a final rule published in the Federal Register , that revised shipper responsibilities related to packaging design variation, manufacturer notification, and recordkeeping requirements for certain packaging types.

In response to petitions for rulemaking submitted by the regulated community, PHMSA proposes to amend the Hazardous Materials Regulations (HMR; 49 CFR Parts 171-180) to update, clarify, or provide relief from miscellaneous regulatory requirements. Specifically, PHMSA is proposing to amend the recordkeeping and package marking requirements for third-party labs and manufacturers to assure the traceability of packaging; clarify an acceptable range in specifications for resins used in the manufacture of plastic drums and Intermediate Bulk Containers (IBCs); remove the listing for “Gasohol, gasoline mixed with ethyl alcohol, with not more than 10% alcohol, NA1203”; harmonize internationally and provide a limited quantity exception for Division 4.1, Self-reactive solids and Self-reactive liquids Types B through F; allow smokeless powder classified as a Division 1.4C material to be reclassified as a Division 4.1 material to relax the regulatory requirements for these materials without compromising safety; and provide greater flexibility by allowing the Dangerous Cargo Manifest to be in locations designated by the master of the vessel besides “on or near the vessel's bridge” while the vessel is in a United States port.