49 CFR Appendix A to Subpart C of Part 178 - Illustrations: Cylinder Tensile Sample

prev next
Appendix A to Subpart C of Part 178 - Illustrations: Cylinder Tensile Sample

The following figures illustrate the recommended locations for test specimens taken from welded cylinders:

FIGURE  #1 THIS FIGURE ILLUSTRATES THE PROPER TENSILE LOCATION FOR A 3 PIECE CYLINDER WITH THE HEADSHAVING STRAIGHT SIDEWALL.
FIGURE  #2 THIS FIGURE ILLUSTRATES THE PROPER TENSILE LOCATION FOR A 2 PIECE CYLINDER WITH THE HEADSHAVING STRAIGHT SIDEWALLS.
FIGURE  #3 THIS FIGURE ILLUSTRATES THE PROPER TENSILE LOCATION FOR A 2 PIECE CYLINDER THAT HAVE DEEPDRAWN HEADS.
FIGURE  #4 THIS FIGURE ILLUSTRATES THE PROPER TENSILE LOCATION FOR A 2 PIECE CYLINDER THAT HAVE DEEPDRAWN HEADS.
FIGURE  #5 THIS FIGURE ILLUSTRATES THE PROPER TENSILELOCATION FOR A 2 PIECE CYLINDER.
[67 FR 51654, Aug. 8, 2002]

The following state regulations pages link to this page.