Jump to navigation
This is a list of United States Code sections, Statutes at Large, Public Laws, and Presidential Documents, which provide rulemaking authority for this CFR Part.
This list is taken from the Parallel Table of Authorities and Rules provided by GPO [Government Printing Office].
It is not guaranteed to be accurate or up-to-date, though we do refresh the database weekly. More limitations on accuracy are described at the GPO site.
§ 2461 note - Mode of recovery
§ 5101 - Purpose
§ 5102 - Definitions
§ 5103 - General regulatory authority
§ 5103a - Limitation on issuance of hazmat licenses
§ 5104 - Representation and tampering
§ 5105 - Transporting certain highly radioactive material
§ 5106 - Handling criteria
§ 5107 - Hazmat employee training requirements and grants
§ 5108 - Registration
§ 5109 - Motor carrier safety permits
§ 5110 - Shipping papers and disclosure
§ 5111 - Repealed. Pub. L. 109–59, title VII, § 7111, Aug. 10, 2005, 119 Stat. 1899]
§ 5112 - Highway routing of hazardous material
§ 5113 - Unsatisfactory safety rating
§ 5114 - Air transportation of ionizing radiation material
§ 5115 - Training curriculum for the public sector
§ 5116 - Planning and training grants, monitoring, and review
§ 5117 - Special permits and exclusions
§ 5118 - Hazardous material technical assessment, research and development, and analysis program
§ 5119 - Uniform forms and procedures
§ 5120 - International uniformity of standards and requirements
§ 5121 - Administrative
§ 5122 - Enforcement
§ 5123 - Civil penalty
§ 5124 - Criminal penalty
§ 5125 - Preemption
§ 5126 - Relationship to other laws
§ 5127 - Judicial review
§ 5128 - Authorization of appropriations
§ 44701 - General requirements
Title 49 published on 2015-12-03
The following are ALL rules, proposed rules, and notices (chronologically) published in the Federal Register relating to 49 CFR Part 107 after this date.
The Pipeline and Hazardous Materials Safety Administration (PHMSA) proposes to amend the Hazardous Materials Regulations (HMR) to maintain consistency with international regulations and standards by incorporating various amendments, including changes to proper shipping names, hazard classes, packing groups, special provisions, packaging authorizations, air transport quantity limitations, and vessel stowage requirements. These revisions are necessary to harmonize the HMR with recent changes made to the International Maritime Dangerous Goods Code, the International Civil Aviation Organization's Technical Instructions for the Safe Transport of Dangerous Goods by Air, and the United Nations Recommendations on the Transport of Dangerous Goods—Model Regulations. Additionally, PHMSA proposes several amendments to the HMR that result from coordination with Canada under the U.S.-Canada Regulatory Cooperation Council.
The Pipeline and Hazardous Materials Safety Administration (PHMSA) is proposing to amend the Hazardous Materials Regulations to revise certain requirements applicable to the manufacture, use, and requalification of DOT-specification cylinders. PHMSA is taking this action in response to petitions for rulemaking submitted by stakeholders and to agency review of the compressed gas cylinders regulations. Specifically, PHMSA is proposing to incorporate by reference or update the references to several Compressed Gas Association publications, amend the filling requirements for compressed and liquefied gases, expand the use of salvage cylinders, and revise and clarify the manufacture and requalification requirements for cylinders.
PHMSA is revising the maximum and minimum civil penalties for a knowing violation of the Federal hazardous material transportation law or a regulation, order, special permit, or approval issued under that law. The “Federal Civil Penalties Inflation Adjustment Act Improvements Act of 2015” (the 2015 Act), which amended the Federal Civil Penalties, Inflation Adjustment Act of 1990 (the Inflation Adjustment Act), requires Agencies to update their civil monetary penalties through interim final rulemaking. The maximum civil penalty for a knowing violation is now $77,114, except for violations that result in death, serious illness, or severe injury to any person or substantial destruction of property, for which the maximum civil penalty is $179,933. In addition, the minimum civil penalty amount for a violation relating to training is now $463.
In this final rule, the Pipeline and Hazardous Materials Safety Administration (PHMSA) is amending the Hazardous Materials Regulations (HMR) to make miscellaneous amendments in order to update and clarify certain regulatory requirements. These amendments are designed to promote safer transportation practices, address petitions for rulemaking, respond to National Transportation Safety Board (NTSB) Safety Recommendations, facilitate international commerce, make editorial corrections, and simplify the regulations. The amendments in this rulemaking include, but are not limited to, removing the packing group (PG) II designation for certain organic peroxides, self-reactive substances, and explosives; incorporating requirements for trailers of manifolded acetylene cylinders; providing requirements to allow for shipments of damaged wet electric batteries; and revising the requirements for the packaging of nitric acid, testing of pressure relief devices on cargo tanks, and shipments of black or smokeless powder for small arms.
This SNPRM proposes to incorporate and allow the use of the 2015 edition of the American Society of Mechanical Engineers (ASME) Boiler and Pressure Vessel Code, Section XII—Rules for Construction and Continued Service of Transport Tanks for the construction and continued service of cargo tank motor vehicles (CTMVs), cryogenic portable tanks, and multi-unit tank car tanks (“ton tanks”). The PHMSA also proposes to incorporate and authorize the use of the 2015 edition of the National Board of Boiler and Pressure Vessel Inspectors National Board Inspection Code, in our regulations as it applies to the continued service of CTMVs, cryogenic portable tanks, and ton tanks constructed to ASME Section XII standards, as well as for existing CTMVs constructed in accordance with the current hazardous materials regulations. If adopted, these amendments will allow for flexibility regarding selection of authorized packaging, in addition to qualification and maintenance for continued service of the packaging, without compromising safety.
As required by the Moving Ahead for Progress in the 21st Century Act (MAP-21), the Pipeline and Hazardous Materials Safety Administration is amending the Hazardous Materials Regulations to adopt provisions contained in certain widely-used or long-standing special permits that have an established safety record. The adopted amendments are intended to provide wider access to the regulatory flexibility offered in special permits and eliminate the need for numerous renewal requests. The adopted amendments will also reduce paperwork burdens and facilitate commerce while maintaining an appropriate level of safety. PHMSA conducted an extensive analysis of all active special permits and codified, as appropriate, those special permits deemed suitable in this rulemaking.