49 CFR Part 192, Subpart M - Maintenance

PHMSA is amending the pipeline safety regulations to address requirements of the Pipeline Safety, Regulatory Certainty, and Job Creation Act of 2011 (2011 Act), and to update and clarify certain regulatory requirements. Among other provisions, PHMSA is adding a specific time frame for telephonic or electronic notifications of accidents and incidents and adding provisions for cost recovery for design reviews of certain new projects, for the renewal of expiring special permits, and setting out the process for requesting protection of confidential commercial information. PHMSA is also amending the drug and alcohol testing requirements, and incorporating consensus standards by reference for in-line inspection (ILI) and Stress Corrosion Cracking Direct Assessment (SCCDA).

This interim final rule (IFR) revises the Federal pipeline safety regulations to address critical safety issues related to downhole facilities, including wells, wellbore tubing, and casing, at underground natural gas storage facilities. This IFR responds to Section 12 of the Protecting our Infrastructure of Pipelines and Enhancing Safety Act of 2016, which was enacted following the serious natural gas leak at the Aliso Canyon facility in California on October 23, 2015. This IFR incorporates by reference two American Petroleum Institute (API) Recommended Practices (RP): API RP 1170, “Design and Operation of Solution-mined Salt Caverns used for Natural Gas Storage,” issued in July 2015; and API RP 1171, “Functional Integrity of Natural Gas Storage in Depleted Hydrocarbon Reservoirs and Aquifer Reservoirs,” issued in September 2015.

This notice announces a public meeting of the Technical Pipeline Safety Standards Committee, also known as the Gas Pipeline Advisory Committee (GPAC). The GPAC will meet to discuss a proposed rulemaking to address regulatory requirements for onshore gas transmission and gathering pipelines.

Excess flow valves (EFV), which are safety devices installed on natural gas distribution pipelines to reduce the risk of accidents, are currently required for new or replaced gas service lines servicing single-family residences (SFR), as that phrase is defined in 49 CFR 192.383(a). This final rule makes changes to part 192 to expand this requirement to include new or replaced branched service lines servicing SFRs, multifamily residences, and small commercial entities consuming gas volumes not exceeding 1,000 Standard Cubic Feet per Hour (SCFH). PHMSA is also amending part 192 to require the use of either manual service line shut-off valves ( e.g., curb valves) or EFVs, if appropriate, for new or replaced service lines with meter capacities exceeding 1,000 SCFH. Lastly, this final rule requires operators to notify customers of their right to request installation of an EFV on service lines that are not being newly installed or replaced. PHMSA has left the question of who bears the cost of installing EFVs on service lines not being newly installed or replaced to the operator's rate-setter.

PHMSA is issuing this advisory bulletin to all owners and operators (operators) of hazardous liquid, carbon dioxide, and gas pipelines, as defined in 49 Code of Federal Regulations Parts 192 and 195, to clarify the regulatory requirements that may vary depending on the operational status of a pipeline. Further, this advisory bulletin identifies regulatory requirements operators must follow for the abandonment of pipelines. Pipeline owners and operators should verify their operations and procedures align with the regulatory intent of defined terms as described under this bulletin. Congress recognized the need for this clarification in its Protecting our Infrastructure of Pipelines and Enhancing Safety Act of 2016.

On April 8, 2016, (81 FR 20722) PHMSA published in the Federal Register a Notice of Proposed Rulemaking (NPRM) titled: “Pipeline Safety: Safety of Gas Transmission and Gathering Pipelines” seeking comments on changes to the pipeline safety regulations for gas transmission and gathering pipelines. PHMSA has received several requests to extend the comment period. PHMSA is granting these requests and extending the comment period from June 7, 2016, to July 7, 2016.

This notice announces a public meeting of the Gas Pipeline Advisory Committee (GPAC), also known as the Technical Pipeline Safety Standards Committee, and the Liquid Pipeline Advisory Committee (LPAC), also known as the Technical Hazardous Liquid Pipeline Safety Standards Committee. The GPAC will meet to discuss a proposed rulemaking to address regulatory requirements involving plastic piping systems used in gas services and both committees will meet jointly to discuss a proposed rulemaking to strengthen the federal pipeline safety regulations and to address sections 9 (accident and incident reporting) and 13 (cost recovery for design-review work) of the Pipeline Safety, Regulatory Certainty, and Job Creation Act of 2011 (2011 Act). Both committees will also be briefed on the “Pipeline Safety: Safety of Gas Transmission and Gathering Pipelines” proposed rulemaking.

This Notice of Proposed Rulemaking (NPRM) proposes to revise the Pipeline Safety Regulations applicable to the safety of onshore gas transmission and gathering pipelines. PHMSA proposes changes to the integrity management (IM) requirements and proposes changes to address issues related to non-IM requirements. This NPRM also proposes modifying the regulation of onshore gas gathering lines.

On March 11, 2015, PHMSA published a final rule amending the pipeline safety regulations to make miscellaneous changes that updated and clarified certain regulatory requirements. These amendments addressed several subject matter areas, including the performance of post-construction inspections, Type B onshore gas gathering line leak surveys, qualifying plastic pipe joiners, ethanol regulation, pipe transportation, offshore pipeline condition report filing, pressure reduction calculations for hazardous liquid pipeline anomalies, and components fabricated by welding. This final rule responds to petitions for reconsideration of the final rule.

Excess Flow Valves (EFVs), which are safety devices installed on natural gas pipelines to reduce the risk of accidents, are currently required for new or replaced gas service lines servicing single-family residences (SFR). PHMSA is proposing to make changes to part 192 to expand this requirement to include new or replaced branched service lines servicing SFRs, multi-family residences, and small commercial entities consuming gas volumes not exceeding 1,000 Standard Cubic Feet per Hour (SCFH). PHMSA is also proposing to require the use of manual service line shut-off valve ( e.g., curb valves) for new or replaced service lines with meter capacities exceeding 1,000 SCFH. Finally, PHMSA is proposing that operators notify customers of their right to request installation of an EFV on service lines that are not being newly installed or replaced. PHMSA is proposing to delegate the question of who bears the cost of installing EFVs to service lines that are not being newly installed or replaced to the operator, customer, and the appropriate State regulatory agency.

PHMSA is proposing amendments to the pipeline safety regulations to address requirements of the Pipeline Safety, Regulatory Certainty, and Job Creation Act of 2011 (2011 Act), and to update and clarify certain regulatory requirements. Among other provisions, PHMSA is proposing to add a specific time frame for telephonic or electronic notifications of accidents and incidents and add provisions for cost recovery for design reviews of certain new projects, for the renewal of expiring special permits, and for submitters of information to request PHMSA keep the information confidential. We are also proposing changes to the operator qualification (OQ) requirements and drug and alcohol testing requirements and incorporating consensus standards by reference for in-line inspection (ILI) and Stress Corrosion Cracking Direct Assessment (SCCDA).

PHMSA is proposing to amend the natural and other gas pipeline safety regulations (49 CFR part 192) to address regulatory requirements involving plastic piping systems used in gas services. These proposed amendments are intended to correct errors, address inconsistencies, and respond to petitions for rulemaking. The requirements in several subject matter areas are affected, including incorporation of tracking and traceability provisions; design factor for polyethylene (PE) pipe; more stringent mechanical fitting requirements; updated and additional regulations for risers; expanded use of Polyamide-11 (PA-11) thermoplastic pipe; incorporation of newer Polyamide-12 (PA-12) thermoplastic pipe; and incorporation of updated and additional standards for fittings.

PHMSA is amending the pipeline safety regulations to make miscellaneous changes that update and clarify certain regulatory requirements. These amendments address several subject matter areas including the performance of post-construction inspections, leak surveys of Type B onshore gas gathering lines, qualifying plastic pipe joiners, regulation of ethanol, transportation of pipe, filing of offshore pipeline condition reports, and calculation of pressure reductions for hazardous liquid pipeline anomalies. The changes are addressed on an individual basis and, where appropriate, made applicable to the safety standards for both gas and hazardous liquid pipelines. Editorial changes are also included.

PHMSA is amending the Federal pipeline safety regulations to incorporate by reference new, updated or reaffirmed editions of the voluntary consensus standards that are applicable to pipelines subject to the requirements of the Federal pipeline safety regulations. This final rule also makes non-substantive editorial corrections clarifying regulatory language in certain provisions. These changes are minor and do not require pipeline operators to undertake any significant new pipeline safety initiatives.

On August 1, 2013, PHMSA published a notice of inquiry in the Federal Register on “Class Location Requirements,” seeking comments on whether integrity management program (IMP) requirements, or elements of IMP, should be expanded beyond high consequence areas (HCA) and, with respect to gas transmission pipeline facilities, whether applying IMP requirements to additional areas would mitigate the need for class location requirements. PHMSA has received two requests to extend the comment period to allow stakeholders more time to evaluate the notice of inquiry. PHMSA concurs with this request and is extending the comment period from September 30, 2013, to November 1, 2013.

PHMSA is amending the pipeline safety regulations to update the administrative civil penalty maximums for violation of the safety standards to reflect current law, to update the informal hearing and adjudication process for pipeline enforcement matters to reflect current law, and to make other technical corrections and updates to certain administrative procedures. The amendments do not impose any new operating, maintenance, or other substantive requirements on pipeline owners or operators.

PHMSA is proposing to amend the pipeline safety regulations to incorporate by reference (IBR) all or parts of new, updated, or reaffirmed editions of voluntary consensus standards that are available on the Internet, free-of-charge, to the public. PHMSA is also proposing to make non-substantive edits and to clarify regulatory language in certain provisions. These proposed changes are relatively minor, and would not require pipeline operators to undertake any significant new pipeline safety initiatives.

PHMSA is seeking public comment on whether applying the integrity management program (IMP) requirements, or elements of IMP, to areas beyond current high consequence areas (HCAs) would mitigate the need for class location requirements for gas transmission pipelines. Section 5 of the Pipeline Safety, Regulatory Certainty, and Job Creation Act of 2011 requires the Secretary of Transportation to evaluate and issue a report on whether IMP requirements should be expanded beyond HCAs and whether such expansion would mitigate the need for class location requirements.

PHMSA is issuing an Advisory Bulletin to remind owners and operators of liquefied petroleum gas (LPG) and utility liquefied petroleum gas (utility LP-Gas) plants that although they must follow the American National Standards Institute/National Fire Protection Association (ANSI/NFPA) standards 58 or 59, they must also follow certain sections and requirements of Part 192.

This Notice of Proposed Rulemaking updates the administrative civil penalty maximums for violation of the pipeline safety regulations to conform to current law, updates the informal hearing and adjudication process for pipeline enforcement matters to conform to current law, amends other administrative procedures used by PHMSA personnel, and makes other technical corrections and updates to certain administrative procedures. The proposed amendments do not impose any new operating, maintenance, or other substantive requirements on pipeline owners or operators.

This notice advises owners and operators of pipeline facilities of PHMSA's plan for implementing the national registry of pipeline and liquefied natural gas operators. This notice provides updates to the information contained in a PHMSA Advisory Bulletin published on January 13, 2012 (77 FR 2126).