A. Except as
provided in subsection (B) the person who prepares the biosolids shall conduct
self-monitoring events at the frequency listed in Table 5 for the pollutants
listed in
R18-9-1005, the pathogen reduction
in
R18-9-1006 and the vector
attraction reduction requirements in
R18-9-1010 .
Table 5. Frequency of Self-monitoring
|
Amount of biosolids prepared
(tons/metric tons per 365-day
period(1))
|
Frequency
|
|
Greater than zero but less than 319.6/290
|
Once per year
|
|
Equal to or greater than 319.6/290 but less than
1,653/1,500
|
Once per quarter
(Four times per year)
|
|
Equal to or greater than 1,653/1,500 but less than
16,530/15,000
|
Once per 60 days
(Six times per year)
|
|
Equal to or greater than 16,530/15,000
|
Once per month
(12 times per year)
|
(1) The amount
of biosolids prepared in a calendar year (dry-weight basis).
B. If biosolids are stockpiled or
lagooned, the person shall sample the biosolids for pathogen and vector
attraction reduction before land application. A person shall sample in a manner
that is representative of the entire stockpile or lagoon.
C. A person who prepares biosolids shall
submit additional or more frequent biosolids samples, collected and analyzed
during the reporting period, to the Department with the regularly-scheduled
data required in subsection (A).
D.
The Department may order the person who prepares biosolids or the applicator to
collect and analyze additional samples to measure pollutants of concern other
than those established in Table 1 of
R18-9-1005.
E. The applicator, person who prepares
biosolids, or a person collecting samples for the applicator or preparer for
analysis shall obtain the samples in a manner that does not compromise the
integrity of the sample, sample method, or sampling instrument and shall be
representative of the quality of the biosolids being applied during the
reporting period.
F. A person
responsible for sampling the biosolids shall track biosolids samples using a
chain-of-custody procedure that documents each person in control of the sample
from the time it was collected through the time of analysis.
G. The person who prepares biosolids or the
applicator shall ensure that the biosolids samples are analyzed as specified by
the analytical methods established in
40 CFR
503.8, July 1, 2001 edition, or by the
wastewater sample methods and solid, liquid, and hazardous waste sample methods
established in A.A.C.
R9-14-612 and
R9-14-613. The person who prepares the
biosolids or the applicator shall ensure that the biosolids analyses are
performed at a laboratory operating in compliance with A.R.S. §
36-495 et seq. The information in
40 CFR
503.8 is incorporated by reference, does not
include any later amendments or editions of the incorporated matter and is on
file with the Department and the Office of the Secretary of State.
H. The person who prepares the biosolids or
the applicator shall monitor pathogen and vector attraction reduction treatment
operating parameters, such as time and temperature, shall be monitored on a
continual basis.
I. An applicator
shall conduct and record monitoring of each site for the management practices
established in
R18-9-1007 and
R18-9-1008.
J. A person shall maintain, as specified in
R18-9-1013, and report to the
Department as specified in
R18-9-1014, all compliance
measurements, including the analysis of pollutant concentrations.