Cal. Code Regs. Tit. 3, § 686 - Butter Grades
In accordance with Section 37103 of the Food and Agricultural Code, quality designations are to be affixed on butter packages as follows:
(a) On quarter-pound,
half-pound, one-pound and two-pound butter wrappers, the quality designations
shall appear on the lower side panel. No other printing shall appear on the
lower side panel, except designations which have been approved by the director,
which designs shall in no case overlap or interfere with the legibility of said
quality designations. On continuous design machine wrappers, the quality
designation need not appear on the lower side panel but at least two full
quality designations shall appear on each wrapper. The quality designations on
quarter-pound and half-pound wrappers are required to appear in 12-point type
in caps for the letters and 24-point type for the numerals. On one and
two-pound wrappers the 24-point type in caps is to be used for the letters and
48-point type for the numerals. When butter is packaged in any other than
quarter-pound, half-pound, one or two-pound prints the size of type to be used
for quality designations on such packages shall be approved by the
director.
(b) The quality
designations must b spelled out with no abbreviations being permitted. The
terms to be used are as follows: "1 First Quality 1" and "2 Second Quality
2."
(c) On butter cartons, or
packages, the quality designations must appear on the two end or side panels
with nothing else appearing thereon, except that the name of the manufacturer
or the brand of the butter may appear. The same terms appearing on the wrapper
shall be used, except that the words "first quality" or "second quality" are to
appear as in the following arrangement:
FIRST QUALITY
The numerals shall also appear on each side of the end panel.
(d) On the half-pound
and one-pound carton, the numerals shall be three-quarters of an inch in height
and the lettering one-fourth of an inch in height. On cartons or packages of
two pounds or more, including chiplets, the numerals shall be one and
one-fourth inches in height and the lettering one-half inch in
height.
(e) When the name of the
manufacturer or the name of the brand of butter appears in connection with
quality designations, they shall be in letters not larger than half the size of
the type used for quality designations.
(f) Quality designations are to be of the
same color used for the manufacturer's name or butter brand except where
otherwise approved in writing by the director. Yellow and similar colors are
not to be used for quality designations.
Notes
2. Amendment filed 9-21-56; effective thirtieth day thereafter (Register 56, No. 18).
3. Amendment filed 2-23-62; effective thirtieth day thereafter (Register 62, No. 4).
4. Amendment filed 4-25-75 as procedural and organizational; effective upon filing (Register 75, No. 17).
2. Amendment filed 9-21-56; effective thirtieth day thereafter (Register 56, No. 18).
3. Amendment filed 2-23-62; effective thirtieth day thereafter (Register 62, No. 4).
4. Amendment filed 4-25-75 as procedural and organizational; effective upon filing (Register 75, No. 17).
State regulations are updated quarterly; we currently have two versions available. Below is a comparison between our most recent version and the prior quarterly release. More comparison features will be added as we have more versions to compare.
No prior version found.