Fla. Admin. Code Ann. R. 5J-18.014 - Training of Managers, Attendants, and Maintenance Persons
(1) The owner or
manager shall maintain the record of employee training required by Section
616.242(17),
F.S., on department form FDACS-03431, Rev. 05/24, Fair Rides Employee Training
Record. In lieu of form FDACS-03431 as incorporated by reference in Rule
5J-18.0012, F.A.C., the owner or
manager may request approval of an alternative form by submitting the form to
the department by email to FairRides@FDACS.gov, by fax to (850)410-3797, or by
mail to Bureau of Fair Rides Inspection, 2005 Apalachee Parkway, Tallahassee,
Florida 32399-6500. The department shall approve the alternative form for use
if the alternative form includes, at a minimum, all information required on the
applicable department form. Upon approval, an alternative form may be used to
document employee training as required by Section
616.242(17),
F.S.
(2) In order to facilitate
safe installation and operation, and in addition to the requirements of
subsections 616.242(5), (6) and
(7), F.S., any owner or manager applying for
a permit to operate an amusement ride must demonstrate competency by holding a
valid certification based on the type of the amusement ride being operated.
Valid certifications include a National Association of Amusement Ride Safety
Officials (NAARSO) certification, or a valid Amusement Industry Manufacturers
and Suppliers International (AIMS) inspection or maintenance certification, or
certification from another professional organization that meets or exceeds the
certification requirements set forth above unless a professional organization
does not exist for the type of amusement device(s) operated by the owner or
manager.
(3) In lieu of holding the
qualifications listed in subsection (2), the owner or manager may designate a
representative who meets the requirements set forth therein.
(4) Operator training shall be consistent
with training programs outlined in accordance with ASTM International Committee
F-24 on Amusement Rides and Devices Designations, as incorporated by reference
in Rule 5J-18.0011, F.A.C., to include
the following, at a minimum:
(a) Description
of the amusement device and its normal operations;
1. Instructions on what is considered normal
operations;
2. Examples of abnormal
operations;
(b)
Instructions on proper operations of the amusement ride;
1. Demonstration of operator controls and the
specific meaning of each mechanism on the control panel;
2. Demonstration of restraint
checks;
3. Demonstration of
loading/unloading procedures to include balance;
4. Demonstration of emergency stop
procedures;
(c) Specific
manufacturer instructions or requirements;
(d) Specific employee duties and
responsibilities;
1. Responsibilities of each
employee before, during and after the ride cycle;
2. Responsibility of employee during
opening/closing;
(e)
General safety procedures;
(f)
Emergency procedures;
1. Responsibility of the
employee during an emergency;
2.
Responsibility during unscheduled cessation of the ride;
3. Responsibility during an evacuation
situation;
(g)
Environmental considerations for operation;
1.
Understanding of weather conditions that would cease operation of the
ride;
2. Understanding of employee
role during cessation of ride due to weather;
(h) Guidelines regarding patron admission;
1. Operator responsibility regarding size,
weight, age and special considerations for patrons.
2. Operator responsibility should a situation
arise whereby patron admission is in question;
(i) Demonstration of proper operation based
on assigned duties.
(5)
Maintenance training shall be consistent with training programs in accordance
with ASTM International Committee F-24 on Amusement Rides and Devices
Designation, as incorporated by reference in Rule
5J-18.0011, F.A.C., to include
the following, at a minimum:
(a) Description
of the amusement device and its normal operations;
(b) Instructions on proper operations of the
amusement ride;
(c) Requirements of
maintenance personnel in regard to testing and inspections;
1. Replacement schedules for fasteners,
wheels, or other consumable parts;
2. Lubrication schedules;
(d) Preventative maintenance
assignments;
1. Inspections to be
performed;
2. Safety
instructions;
3. Additional
manufacturer or owner instructions;
(e) Replacement parts;
1. Schedule of part replacement;
2. Understanding of manufacturer drawings and
specifications;
(f)
Nondestructive testing requirements;
(g) Daily, weekly, monthly maintenance
requirements to include;
1. Preopening
inspections;
2. Visual
inspections;
3. Fastener
inspections;
4. Lubrication
requirements;
5. Control system
inspections;
6. Structural
inspections;
7. Electrical
inspections;
8. Operational
testing;
(h)
Understanding of ride schematics for ride related systems individual is
accountable for;
(i) General safety
procedures;
(j) Emergency
procedures;
1. Responsibility of the
maintenance personnel during an emergency;
2. Responsibility during unscheduled
cessation of the ride;
3.
Responsibility during an evacuation situation;
(k) Knowledge in environmental considerations
for operation;
(l) Knowledge of
procedures to be followed in the event of an extended period of non-operation,
storage, or both.
(m) Environmental
considerations for operation;
1. Understanding
of weather conditions that would cease operation of the ride;
2. Understanding of employee role during
cessation of ride due to weather;
(6) Operators and maintenance personnel shall
be retrained on an annual basis on all requirements outlined in subsections (4)
and (5) of this rule. Management will review operators throughout the year to
identify if training is needed on a more frequent basis than
annually.
(7) The department may
require retraining due to an accident or identified safety violation.
Notes
Rulemaking Authority 616.165, 616.242(4), (17) FS. Law Implemented 616.242(17) FS.
State regulations are updated quarterly; we currently have two versions available. Below is a comparison between our most recent version and the prior quarterly release. More comparison features will be added as we have more versions to compare.
No prior version found.