Fla. Admin. Code Ann. R. 62-560.620 - Bottled Water, Point-of-Use, and Point-of-Entry Devices
(1) The Department
shall require a public water system to use bottled water, point-of-use devices,
point-of-entry devices, or other means as a condition of granting a variance or
an exemption from the maximum contaminant levels and maximum residual
disinfectant levels listed in subsections
62-550.310(1), (2), (3), (4), (5)(a) and
(6), F.A.C., to avoid an unreasonable risk to
health. The Department shall require a public water system to use bottled
water, point-of-use devices, point-of-entry devices, or other means as a
condition of granting an exemption from the treatment technique requirements
listed in subsections
62-550.315(1) and
(4), F.A.C., or an exemption from the surface
water filtration requirements in Part VI of Chapter 62-555, F.A.C., to avoid an
unreasonable risk to health. The Department shall require a public water system
to use bottled water and point-of-use devices or other means, but not
point-of-entry devices, as a condition for granting an exemption from corrosion
control treatment requirements for lead and copper in Rule
62-550.800, F.A.C., to avoid an
unreasonable risk to health. The Department shall require a public water system
to use point-of-entry devices as a condition for granting an exemption from the
source water treatment and lead service line replacement requirements for lead
and copper in Rule 62-550.800, F.A.C., to avoid an unreasonable risk to
health.
(2) A public water system
that uses bottled water as a condition for receiving a variance or an exemption
under Rule 62-560.510 or
62-560.520, F.A.C., shall
receive certification from the bottled water company that the bottled water has
been taken from an approved source as defined in the April 1, 2000, edition of
21 C.F.R.
129.3(a); has been monitored
by the bottled water company in accordance with the April 1, 2000, edition of
21 C.F.R.
129.80(g)(1) through (3);
and does not exceed any maximum contaminant levels or quality limits as set out
in the April 1, 2000, edition of
21 C.F.R.
165.110(b). All of the
aforementioned federal regulations are incorporated herein by reference. The
authorized representative of the public water system shall provide such
certification to the Department once during the first three-month period that
the public water system supplies bottled water and annually thereafter for as
long as bottled water is being supplied. The public water system shall provide
sufficient quantities of bottled water to every person supplied by the public
water system via door-to-door bottled water delivery.
(3) Public water systems that use
point-of-entry or point-of-use devices as a condition for obtaining a variance
or an exemption under Rule
62-560.510 or 62-560.520,
F.A.C., shall meet the following requirements:
(a) The public water system shall operate and
maintain the point-of-use or point-of-entry treatment system. The supplier of
water shall make a showing to the Department that buildings connected to the
system have sufficient point-of-use or point-of-entry devices that are properly
installed, maintained, and monitored such that all consumers will be
protected.
(b) Before point-of-use
or point-of-entry devices are installed, the authorized representative of the
public water system shall certify that the system will sample from a
representative tap served by one of the devices once during the first
three-month period after the devices are installed and annually thereafter for
each contaminant or disinfectant residual for which the variance or exemption
was received.
(c) The
microbiological safety of the water shall be maintained at all times. The
public water system shall revise the microbiological sampling plan required by
subsection 62-550.518(1),
F.A.C., to include taps now served by the point-of-use or point-of-entry
devices.
(d) The Department shall
require that the public water system provides adequate certification of
performance, field testing, and, if not included in the certification process,
an engineering design review of the point-of-use or point-of-entry device. A
device carrying a National Sanitation Foundation certification shall be
considered adequate for the performance requirements of this
paragraph.
(e) The design and
application of point-of-use and point-of-entry devices shall consider the
potential for increasing concentrations of heterotrophic bacteria in water
treated with activated carbon. It may be necessary to use frequent backwashing,
disinfection after treatment, and heterotrophic plate count monitoring to
ensure that the microbiological safety of the water is not
compromised.
(f) As part of meeting
the requirement to use a point-of-entry device as a condition for being granted
an exemption from the source water treatment or lead service line replacement
requirements in Rule 62-550.800, F.A.C., the
authorized representative of the public water system shall certify that use of
the device will not cause increased corrosion of lead and copper bearing
materials located between the device and the tap that could increase
contaminant levels at the tap.
Notes
Rulemaking Authority 403.861(9) FS. Law Implemented 403.853 FS.
New 1-1-93, Amended 7-4-93, Formerly 17-560.620, Amended 9-7-94, 11-27-01.
State regulations are updated quarterly; we currently have two versions available. Below is a comparison between our most recent version and the prior quarterly release. More comparison features will be added as we have more versions to compare.
No prior version found.