An application for a specific license to use sealed sources
in a large irradiator shall be made as specified in Rule
64E-5.207, F.A.C. A separate
license is required for each large irradiator, radiation room or underwater
irradiator. The department will approve an application for a specific license
for the use of licensed material in an irradiator if the applicant meets the
requirements contained in this section.
(1) The applicant must satisfy the general
requirements specified in Rule
64E-5.208, F.A.C., and the
requirements contained in this part.
(2) The applicant must describe training for
irradiator operators which includes the following:
(a) At least 40 hours of classroom
training;
(b) At least 160 hours of
on-the-job or simulator training;
(c) Safety reviews;
(d) The means the applicant will use to
evaluate the operator's knowledge and understanding of and ability to comply
with the department's rules and licensing requirements and the applicant's
operating and emergency procedures; and,
(e) The minimum qualifications of personnel
who provide training.
(3)
The applicant shall submit an outline or summary of the written operating and
emergency procedures specified in Rule
64E-5.1417, F.A.C. The outline
or summary must include important radiation safety aspects of the
procedures.
(4) The applicant shall
describe the radiation safety responsibilities and authority of the radiation
safety officer and other management personnel and specify who has the authority
to stop unsafe operations. The applicant also shall describe the qualifications
required of the radiation safety officer.
(5) The applicant shall submit a description
of the access control systems required by Rule
64E-5.1406, F.A.C., the
radiation monitors required by Rule
64E-5.1409, F.A.C., the method
to detect leaking sources required by Rule
64E-5.1420, F.A.C., including
the sensitivity of the method, and a diagram of the facility which shows the
position of all required interlocks and radiation monitors.
(6) The applicant shall assure that any
radioactive source not used in the irradiation process shall be removed from
the irradiator pool and disposed of or returned to the manufacturer unless
otherwise approved by the department.
(7) If the applicant intends to perform leak
testing of dry-source-storage sealed sources, the applicant shall establish
procedures for leak testing and submit a description of these procedures to the
department for approval. The procedures must include the following:
(a) Instruments to be used;
(b) Methods of performing the analysis; and,
(c) Pertinent experience of
individuals who analyze the samples.
(8) If licensee personnel load or unload
sources, the applicant shall describe the qualifications of the personnel and
the procedures to be used. If the applicant contracts for source loading or
unloading, the loading or unloading must be done by an organization licensed by
the U.S. Nuclear Regulatory Commission, an agreement state or a licensing state
to load or unload irradiator sources.
(9) The applicant shall perform operational
tests on the following to ensure proper functioning of all equipment and safety
devices before the irradiator is loaded with sources:
(a) Interlock and radiation safety
systems;
(b) Pool integrity and
plumbing;
(c) Source rack
mechanical positioning system;
(d)
Source rack movement and position sensing systems;
(e) Source rack electrical control
system;
(f) Uninterruptable
electrical power supply for radiation monitoring warning systems;
(g) Fire protection system;
(h) Emergency systems for returning a stuck
source rack into the pool;
(i)
Systems used for transferring sources to and from transport vehicles; and,
(j) Product conveyor
system.
(10) The
applicant shall describe the operational inspection and maintenance program,
including the frequency of operational checks required by Rule
64E-5.1421, F.A.C.
(11) The roof plug opening or removable
shielding providing access for the loading and removal of sources shall be
large enough to accommodate the largest applicable transportation
cask.