Haw. Code R. § 11-501-15 - Reporting

(a) Any new source to which this chapter applies, with the exception of sources subject to sections 11-501-5, 11-501-7, 11-501-8, and 11-501-10, which has an initial startup date preceding the effective date of this chapter, shall provide the following information to the director, postmarked or delivered, within ninety days of the effective date. In the case of a new source that does not have an initial startup date preceding the effective date, the information shall be provided to the director, postmarked or delivered, within ninety days of the initial startup date. Any owner or operator of an existing source shall provide the following information to the director within ninety days of the effective date of this chapter unless the owner or operator of the existing source has previously provided this information to the director. Any changes in the information provided by any existing source shall be provided to the director, postmarked or delivered, within thirty days after the change. The information shall include:

(1) A description of the emission control equipment used for each process:

(A) If the fabric device uses a woven fabric, the airflow permeability in m³/min/m² and, if the fabric is synthetic, whether the fill yarn is spun or not spun; and

(B) If the fabric filter device uses a felted fabric, the density in g/m², the minimum thickness in inches, and the airflow permeability in m³/min/m²;

(2) If a fabric filter device is used to control emissions:

(A) The airflow permeability in m³/min/m² (ft³ /min/ft²) if the fabric filter device uses a woven fabric, and, if the fabric is synthetic, whether the fill yarn is spun or not spun; and

(B) If the fabric filter device uses a felted fabric, the density in g/m² (oz/yd²), the minimum thickness in millimeters (inches), and the airflow permeability in m³/min/m² (ft³ /min/ft²) ;

(3) If a HEPA filter is used to control emissions, the certified efficiency;

(4) For sources subject to sections 11-501-11 and 11-501-12:

(A) A brief description of each process that generates asbestos-containing waste material;

(B) The average volume of asbestos-containing waste material disposed of, measured in m³/day (yd³/day);

(C) The emission control methods used in all stages of waste disposal; and

(D) The type of disposal site or incineration site used for ultimate disposal, the name of the site operator, and the name and location of the disposal site; and

(5) For sources subject to sections 11-501-13 and 11-501-16:

(A) A brief description of the site; and

(B) The method or methods used to comply with the standard, or alternative procedures to be used.

(b) The information described in this section shall be reported using the format of Appendix A of 40 CFR Part 61, entitled "National Emission Standards for Hazardous Air Pollutants Compliance Status Information", dated November 20, 1990. shall also comply with this provision.

Notes

Haw. Code R. § 11-501-15

[Eff ] (Auth: HRS § 342P-41) (Imp: 40 CFR Part 61.153)