Ill. Admin. Code tit. 35, § 212.113 - Incorporations by Reference
The following materials are incorporated by reference. These incorporations do not include any later amendments or editions.
a) 40 CFR part 60, Appendix A (1991):
1) Method 1: Sample and Velocity Traverses
for Stationary Sources;
2) Method
1A: Sample and Velocity Traverses for Stationary Source with Small Stacks or
Ducts;
3) Method 2: Determination
of Stack Gas Velocity and Volumetric Flow Rate (Type S pitot tube);
4) Method 2A: Direct Measurement of Gas
Volume Through Pipes and Small Ducts;
5) Method 2C: Determination of Stack Gas
Velocity and Volumetric Flow Rate in Small Stacks or Ducts (Standard Pitot
Tube);
6) Method 2D: Measurement of
Gas Volumetric Flow Rates in Small Pipes and Ducts;
7) Method 3: Gas Analysis for Carbon Dioxide,
Oxygen, Excess Air, and Dry Molecular Weight;
8) Method 4: Determination of Moisture
Content in Stack Gases;
9) Method
5: Determination of Particulate Emissions From Stationary Sources;
10) Method 5A: Determination of Particulate
Emissions From the Asphalt Processing and Asphalt Roofing Industry;
11) Method 5D: Determination of Particulate
Matter Emissions From Positive Pressure Fabric Filters;
12) Method 5E: Determination of Particulate
Emissions From the Wool Fiberglass Insulation Manufacturing Industry;
13) Method 9: Visual Determination of the
Opacity of Emissions from Stationary Sources;
14) Method 22: Visual Determination of
Fugitive Emissions from Material Sources and Smoke Emissions from
Flares.
b) 40 CFR part
51 Appendix M (1994):
1) Method 201:
Determination of PM-10 Emissions;
2) Method 201A: Determination of PM-10
Emissions (Constant Sampling Rate Procedure);
3) Method 202: Determination of Condensible
Particulate Emissions from Stationary Sources.
c)
40 CFR
60.672(b), (c), (d) and (e)
(1991).
d)
40 CFR 60.675(c) and
(d) (1991).
e) ASAE Standard 248.2, Section 9, Basis for
Stating Drying Capacity of Batch and Continuous-Flow Grain Dryers, American
Society of Agricultural Engineers, 2950 Niles Road, St. Joseph, MI
49085.
f) U.S. Sieve Series,
ASTM-E11, American Society of Testing Materials, 1916 Race Street,
Philadelphia, PA 19103.
g) Standard
Methods for the Examination of Water and Wastewater, Section 209C, "Total
Filtrable Residue Dried at 103-105~ C," 15th Edition, 1980, American Public
Health Association, 1015 Fifteenth Street, N.W., Washington, D.C.
20005.
h) "Guideline on the
Identification and Use of Air Quality Data Affected by Exceptional Events,"
U.S. Environmental Protection Agency, Office of Air and Radiation, Office of
Air Quality Planning and Standards Monitoring and Data Analysis Division,
Research Triangle Park, N.C. 27711, EPA-450/4-86-007 July 1986.
i) "Guideline on Air Quality Models
(Revised)," U.S. Environmental Protection Agency, Office of Air Quality
Planning and Standards, Research Triangle Park, N.C. 27711, EPA-450/2-78-027R
July 1986.
j)40 CFR 50, Appendix K
(1992), "Interpretation of the National Ambient Air Quality Standard for
Particulate Matter".
Notes
Amended at 20 Ill. Reg. 7605, effective May 22, 1996
State regulations are updated quarterly; we currently have two versions available. Below is a comparison between our most recent version and the prior quarterly release. More comparison features will be added as we have more versions to compare.
No prior version found.