Ill. Admin. Code tit. 35, § 725.357 - Special Requirements for Incompatible Wastes
a) Incompatible wastes, or incompatible
wastes and materials (see appendix V of 40 CFR 265 (Examples of Potentially
Incompatible Waste), incorporated by reference in 35 Ill. Adm. Code
720.111(b),
for examples) must not be placed in the same pile, unless Section
725.117(b)
is complied with.
b) A pile of
hazardous waste that is incompatible with any waste or other material stored
nearby in other containers, piles, open tanks, or surface impoundments must be
separated from the other materials or protected from them by means of a dike,
berm, wall, or other device.
BOARD NOTE: The purpose of this is to prevent fires, explosions, gaseous emissions, leaching, or other discharge of hazardous waste or hazardous waste constituents that could result from the contact or mixing of incompatible wastes or materials.
c) Hazardous waste must not be piled on the
same area where incompatible wastes or materials were previously piled, unless
that area has been decontaminated sufficiently to ensure compliance with
Section
725.117(b).
Notes
Amended at 30 Ill. Reg. 3460, effective February 23, 2006
State regulations are updated quarterly; we currently have two versions available. Below is a comparison between our most recent version and the prior quarterly release. More comparison features will be added as we have more versions to compare.
No prior version found.