Ill. Admin. Code tit. 77, § 870.90 - Requirements for the Installation of Manufactured Homes
a) All manufactured homes installed after
December 31, 2001 shall be installed under the on-site supervision of a
licensed manufactured home installer. [430 ILCS
117/25 ] The licensed installer shall provide
sufficient on-site supervision to ensure quality installation as required by
the manufacturer's specifications or, in the absence of the instructions
provided by the manufacturer, this Part.
b) Homes installed on a permanent foundation
are not required to be installed by a licensed manufactured home
installer.
c) All homes shall
comply with the anchoring requirements contained in Subpart E of this
Part.
d) The requirements of
Sections 870.110 through
870.170 shall apply to homes
installed where the instructions are not available.
e) Nothing in this Part shall preclude local
ordinances, including but not limited to zoning, building codes, or other
ordinances not affecting installation standards or other exclusive State powers
or functions under Section 60 of the Manufactured Home Quality Assurance
Act.
f) The home manufacturer data
plate specifies the design criteria of the homes. For homes that do not have a
data plate, the installation shall be designed for a roof live load design of
20 pounds per square foot.
Notes
State regulations are updated quarterly; we currently have two versions available. Below is a comparison between our most recent version and the prior quarterly release. More comparison features will be added as we have more versions to compare.
No prior version found.