Ill. Admin. Code tit. 92, § 441.40 - Definitions
"Body" - Portion of vehicle that encloses the occupant and cargo spaces and separates those spaces from the chassis frame, engine compartment, driveline, and other chassis components, except certain chassis controls used by the driver.
"Body-on-Chassis" - Completed vehicle consisting of a passenger seating body mounted on a truck type chassis (or other separate chassis) so that the body and chassis are separate entities, although one may reinforce or brace the other.
"Bus" - Every motor vehicle, other than a commuter van, designed for carrying more than ten persons. (Section 1-107 of the Illinois Vehicle Code (the Code)) [625 ILCS 5/1-107 ]
"Chassis" - Every frame or supportive element of a school bus that contains but is not limited to the axles, engine, drive train, steering components, and suspension which the body is attached to. (Section 1-110.1 of the Code)
"Code" - The Illinois Vehicle Code [625 ILCS 5].
"Commercial Vehicle Safety Section" (CVSS) - A section of the Bureau of Safety Programs of the Division of Traffic Safety of the Illinois Department of Transportation.
"Department" - The Department of Transportation of the State of Illinois, acting directly or through its authorized agents or officers. (Section 13-100 of the Code)
"Empty Weight" - Unloaded vehicle weight; i.e., the weight of a vehicle with maximum capacity of all fluids necessary for operation of the vehicle but without cargo or occupant.
"Federal Motor Vehicle Safety Standards" (FMVSS) - The rules, regulations and standards set forth in 49 CFR 571.
"Gross Vehicle Weight Rating or GVWR" - The value specified by the manufacturer as the loaded weight of the school bus. (Section 12-800 of the Illinois Vehicle Equipment Law)
"Illinois Vehicle Equipment Law" - 625 ILCS 5/12-100 through 12 -902
"Interstate School Bus" - Any school bus not owned by a school district designed to transport 16 or more persons, including the driver, that is used for interstate charter purposes (i.e., travels to another state). The bus must be marked with a federal Interstate Commerce Commission (ICC) number. Interstate school buses require an annual inspection that meets 49 CFR 396 - Appendix G as well as the semi-annual or 10,000 mile inspection required by 625 ILCS 5/13-101.
"Manufacturer" - (unless otherwise indicated at the point of use) means the person or organization whose name follows "MANUFACTURED BY" or "MFD BY" on the federal certification label.
"Passenger" - Every occupant of the vehicle who is not the driver.
"Purchase Date" - Date when purchase transaction was completed, not when body or chassis was built.
"School Bus" -
Type I School Bus - A School Bus with gross vehicle weight rating of more than 10,000 pounds.
Type II School Bus - A School Bus with gross vehicle weight rating of 10,000 pounds or less. (Section 12-800 of the Illinois Vehicle Equipment Law)
Every motor vehicle, except as provided below, owned or operated by or for any of the following entities for the transportation of persons regularly enrolled as students in grade 12 or below in connection with any activity of such entity:
Any public or private primary or secondary school;
Any primary or secondary school operated by a religious institution; or
Any public, private or religious nursery school.
This definition shall not include the following:
A bus operated by a public utility, municipal corporation or common carrier authorized to conduct local or interurban transportation of passengers when such bus is not traveling a specific school bus route but is:
On a regularly scheduled route for the transportation of other fare paying passengers;
Furnishing charter service for the transportation of groups on field trips or other special trips or in connection with other special events; or
Being used for shuttle service between attendance centers or other educational facilities.
A motor vehicle of the first division.
A motor vehicle designed for the transportation of not less than 7 nor more than 16 persons that is operated by or for a public or private primary or secondary school, including any primary or secondary school operated by a religious institution, for the purpose of transporting not more than 15 students to and from interscholastic athletic or other interscholastic or school sponsored activities. (Section 1-182 of the Code)
"Seating Reference Point" - the unique design H-point, as defined in SAE J1100, which simulates the position of the pivot center of the human torso and thigh. Each school bus manufacturer utilizes different criteria to determine the specific seating reference point on passenger seats for vehicles they manufacture.
"Type I-A School Bus" means a term commonly used by school bus manufacturers to classify a school bus that is a conversion or body constructed upon a van-type or cutaway front-section vehicle with a left side driver's door, designed for carrying more than 10 persons. The Type I-A school bus has a Gross Vehicle Weight Rating (GVWR) of more than 10,000 pounds.
"Vehicle" -
First Division: Those motor vehicles which are designed for the carrying of not more than ten persons.
Second Division: Those vehicles which are designed for carrying more than ten persons, those designed or used for living quarters and those vehicles which are designed for pulling or carrying property, freight or cargo, those motor vehicles of the First Division remodelled for use and used as motor vehicles of the Second Division, and those motor vehicles of the First Division used and registered as school buses. (Section 1-217 of the Code)
Notes
Amended at 24 Ill. Reg. 12099, effective July 31, 2000
State regulations are updated quarterly; we currently have two versions available. Below is a comparison between our most recent version and the prior quarterly release. More comparison features will be added as we have more versions to compare.