675 IAC 20-1.1-17 - Definitions "R"
Authority: IC 22-13-2-2
Affected: IC 22-12; IC 22-13; IC 22-15; IC 36-7
Sec. 17.
(a) "Rapid sand filter" means a filter designed to be used with sand as the filter media.
(b) "Rated pressure" means that pressure that:
(1) is equal to or less than the designed pressure; and
(2) appears on the data plate of the equipment.
(c) "Receptor" means an approved plumbing fixture or device of such material, shape, and capacity as to adequately receive the discharge from indirect waste piping, so constructed and located as to be readily cleaned.
(d) "Recessed treads" means a series of vertically spaced cavities in the pool wall creating tread areas for steps.
(e) "Removable" means capable of being disassembled with the use of only a simple tool such as a screwdriver, pliers, or a wrench.
(f) "Return piping" means that part of the piping between the filter and the pool or spa through which passes the filtered water. (This piping is frequently referred to as effluent piping.)
(g) "Rope and float line" (transition rope) means a continuous line not less than one-fourth (1/4) inch in diameter that is supported by buoys and attached to opposite sides of a pool to separate the deep and shallow ends.
Notes
State regulations are updated quarterly; we currently have two versions available. Below is a comparison between our most recent version and the prior quarterly release. More comparison features will be added as we have more versions to compare.
No prior version found.