675 IAC 31-2-7 - Standard guide for inspection of amusement rides and devices
Authority: IC 22-13-2-8
Affected: IC 22-15-2-7; IC 22-15-7
Sec. 7.
(a) That
certain document being titled Standard Guide for Inspection of Amusement Rides
and Devices, 2005 edition approved December 1, 2005 (ASTM F893-05a), published
by ASTM International, 100 Barr Harbor Drive, P.O. Box C700, West Conshohocken,
PA 19428-2959, is hereby adopted by reference as if fully set out in this
article save and except those revisions made in this section.
(b) Delete subsection 1.2 in its
entirety.
(c) Delete subsection 2
in its entirety.
(d) Change
subsection 4.1 to read as follows: The purpose of this guide is to delineate
information and recommend inspections for amusement rides and devices between
the manufacturer and owner, which inspections are not those required by
685 IAC 1-4-6
[675 IAC 31-4-6] ,
685 IAC 1-4-8
[675 IAC 31-4-8] , and
685 IAC 1-4-11
[675 IAC 31-4-11]
through 685 IAC 1-4-13
[675 IAC 31-4-13]
.
(e) In section 5.1, add
a first sentence to read as follows: If a manufacturer has failed to perform
the manufacturer's responsibilities, the failure may be a basis to not issue a
regulated amusement device operating permit.
(f) Notwithstanding language to the contrary
in the primarily incorporated documents, the version of all secondarily
incorporated documents, which are documents referred to in the primarily
incorporated documents, shall be the version in effect on September 24,
2009.
Notes
NOTE: Transferred from the Regulated Amusement Device
Safety Board (685 IAC 1-2-7) to the Fire
Prevention and Building Safety Commission (675 IAC
31-2-7) by
P.L.
249-2019,
SECTION
State regulations are updated quarterly; we currently have two versions available. Below is a comparison between our most recent version and the prior quarterly release. More comparison features will be added as we have more versions to compare.
No prior version found.