Iowa Admin. Code r. 27-40.35 - Surface mining permit applications-minimum requirements for information on environmental resources
The following is incorporated by reference: 30 CFR Part 779, as in effect on July 1, 2010, except as modified by subrule 40.1(3) and with the following exceptions:
(1) Delete
from
30
CFR 779.19(a) the words "if
required by the regulatory authority, contain a map" and insert the words
"contain a map at a scale of 1:2400 or larger".
(2) Delete from
30
CFR 779.19(b) the words
"When a map or aerial photograph is required, sufficient adjacent areas shall
be included" and insert the words "A map at a scale of 1:2400 or larger or an
aerial photo shall include sufficient adjacent areas".
(3) Reserved.
(4) Amend the first sentence of
30 CFR
779.25(a) to read: "The
permit application shall include cross sections at a vertical exaggeration of
1:10, maps at a scale of 1:2400 or larger and plans showing-"
(5) Add to
30 CFR
779.25(a)(1) the words "and
a survey coordinate net".
(6) Amend
30 CFR
779.25, cross sections, maps and plans, by
adding the following paragraphs:
(c) Drill
logs must contain the following:
(1) Must have
survey coordinates (northing and easting) relating them to the map grid in the
permit application.
(2) Must show
surface elevation.
(3) Must be
detailed enough to show all changes in material encountered in both
consolidated and unconsolidated overburden.
(8) Reserved.
(9) Delete from
30
CFR 779.18(a) the words
"When requested by the regulatory authority".
(10) Add a new paragraph (c) to
30
CFR 779.18 as follows:
(c) Location of the rain gauges nearest to
the permit area, preferably in the same watershed as the permit itself, shall
be marked on a map, and these shall be described in the text as well, along
with the period of available record at these gauges.
(11) Add a new paragraph (d) to
30
CFR 779.18 as follows:
(d) A brief description shall be provided
about the impact of the climatological factors on operation and reclamation
plans, specifically what part of the year would be more conducive than others
to various mining and reclamation operations.
(12) Delete from
30
CFR 779.24(g) the words
"defined by the regulatory authority" and add at the end the words "Hydrologic
area is the area that consists of the permit area and the adjacent
area."
(13) Insert the words "and
its identification" between the words "road" and "located" in
30
CFR 779.24(h).
(14) Insert at the beginning of
30
CFR 779.24(1) the words
"Section lines and section identification, and any".
Notes
State regulations are updated quarterly; we currently have two versions available. Below is a comparison between our most recent version and the prior quarterly release. More comparison features will be added as we have more versions to compare.
No prior version found.