N.M. Admin. Code § 20.11.65.18 - CUTBACK ASPHALT
A. No
person shall cause, allow, or permit the use of cutback asphalt in quantities
greater than 100 pounds per application directly onto existing or new paved
surfaces without first obtaining a permit for such use from the
department .
B. The director of the
department may only issue a permit to use cutback asphalt if it is determined,
based on information supplied by the applicant, that less than 25 tons per year
of VOC 's will be emitted to the ambient air as a result of the activities
approved under the permit.
C.
Penetrate uses: for the purposes of this subsection, asphalt cement cut with
naphtha for the purposes of getting surface penetration into existing driveway
and parking lot surfaces shall be exempt from the requirements of Subsections A
and B of 20.11.65.18 NMAC. However, this
exemption does not apply between the dates of June 15 through September 15.
During the period of June 15 through September 15 a permit for such operation
shall be required and the department shall consider the annual 25-ton
limitation to apply entirely within the three-month span of this
requirement.
State regulations are updated quarterly; we currently have two versions available. Below is a comparison between our most recent version and the prior quarterly release. More comparison features will be added as we have more versions to compare.
No prior version found.