Ohio Admin. Code 3745-500-03 - Incorporation by reference
Incorporation by reference. The text of the incorporated
materials is not included in the rules contained in Chapters
(1) Code of federal regulations
(C.F.R.). Information and copies may be obtained by writing to: "U.S.
Government Printing Office, P.O. Box 979050, St. Louis, MO 63197-9000." The
full text of the C.F.R. is also available in electronic format at
https://www.gpo.gov/fdsys/. The C.F.R. compilations are also available for
inspection and copying at most public libraries and "The State Library of
(2) Federal statutes. The full text
is available in electronic format at https://www.gpo.gov/fdsys/. These laws are
also available for inspection and copying at most public libraries and "The
State Library of Ohio."
(4) Specifications of the "Test
Methods for Evaluating Solid Waste, Physical/ Chemical Methods, third edition,
including Volume IV, Field Manual (SW-846)." Information and copies may be
obtained by writing to: "National Technical Information Service, U.S.
Department of Commerce, 5285 Port Royal Rd., Springfield, VA 22161." The full
text is also available in electronic format at
https://www.epa.gov/hw-sw846/sw-846-compendium. These test methods are also
available for inspection and copying at most public libraries and "The State
Library of Ohio."
(5) Specifications of the "American
Society for Testing and Materials" (ASTM). Information and copies may be
obtained by writing to: "ASTM International, 100 Barr Harbor Drive, P.O. Box
C700, West Conshohocken, Pennsylvania 19428-2959." These documents are
available for purchase at http://www.astm.org .
(1) Appropriate "Code of Federal
Regulations," the regulations listed in this rule are those effective on July
1, 2015 and include the following:
(a) 40 C.F.R. Part 61 , "National
Emission Standards for Hazardous Air Pollutants (NESHAP)."
(b) 40 C.F.R. Part 761 ,
"Polychlorinated biphenyls (PCBs) manufacturing, processing, distribution in
commerce, and use prohibitions."
(2) Appropriate "Federal Statutes,"
the statutes listed in this rule are those versions of the laws amended through
September 1, 2014, including the following:
(b) Investment Company Act of 1940,
15 U.S.C. 80a-1 to 80a-64.
(c) Hazardous Materials
Transportation Act of 1975, 88 Stat. 2156, 49 U.S.C. 5101.
(d) U.S.C. Title 11,
(a) U.S. Bureau of Economic Analysis
document, available at http://www.bea.gov or by writing to U.S. Bureau of
Economic Analysis, 1441 L Street NW, Washington, DC 20230: "Survey of Current
Business", January 2016.
(b) U.S. environmental protection
agency documents, available at http://www.epa.gov/nscep or by writing to U.S.
Environmental Protection Agency/National Service Center for Environmental
Publications, P. O. Box 42419, Cincinnati, OH 45242-0419, including "Methods
for Chemical Analysis of Water and Wastes, EPA 600/4-79-020", published in
(4) Appropriate "Test Methods for
Evaluating Solid Waste, Physical/Chemical Methods (SW-846)," as amended through
July 22, 2015, including the following:
(a) Method 3050B, "Acid Digestion of
Sediments, Sludges, and Soils."
(b) Method 3051A, "Microwave
assisted acid digestion of sediments, sludges, soils, and
(c) Method 6010D, "Inductively
Coupled Plasma - Atomic Emission Spectrometry."
(d) Method 6020B, "Inductively
Coupled Plasma - Mass Spectrometry."
(e) Method 7000B, "Flame Atomic
(f) Method 7010, "Graphite Furnace
Atomic Absorption Spectrophotometry."
(g) Method 7471B, "Mercury in Solid
or Semisolid Waste (Manual Cold-Vapor Technique)."
(h) Method 9045D, "Soil and Waste
(i) Method 9060A, "Total Organic
(j) Method 9095B, "Paint Filter
(5) Appropriate "American Society
for Testing and Materials." Each of the following ASTM standards are regulated
by the date specified, another standard may be used if it is at least
equivalent to those cited in this rule and is acceptable to Ohio EPA. ASTM
standards include the following:
(a) ASTM D2976-15, "Standard Test
Method for pH of Peat Materials;" approved in 1971; re-approved in 1998 and
(b) ASTM D6270-08, "Standard
Practice for Use of Scrap Tires in Civil Engineering Applications;" approved in
1998; re-approved in 2004 and 2012; amended in 2008.
(c) ASTM D6868-11, "Standard
Specification for Labeling of End Items that Incorporate Plastics and Polymers
as Coatings or Additives with Paper and Other Substrates Designed to be
Aerobically Composted in Municipal or Industrial Facilities;" approved in 2003;
amended in 2011.
Promulgated Under: 119.03
Statutory Authority: 3714.02, 3714.022, 3734.02, 3734.12
Rule Amplifies: 121.71, 121.72, 121.73, 121.75, 3714.02, 3714.022, 3734.02, 3734.12
Prior Effective Dates: 04/02/2012, 04/01/2017, 10/01/2018
State regulations are updated quarterly; we currently have two versions available. Below is a comparison between our most recent version and the prior quarterly release. More comparison features will be added as we have more versions to compare.