34 Pa. Code § 47.235 - Wood railings
(a)
Top
rails. Wood railings shall be not less than 2 inches by 4 inches
finished size. Reference should be made to Plate 3-B of the Appendix of this
Subchapter.
(b)
Alternate
type. A top railing of 1 inch by 4 inches finished size is acceptable
if another board of not less than 1 inch by 4 inches finished size is securely
fastened to the sides of the posts and to the top railing at approximately
right angles to the top railing. Reference should be made to Plate 3-C of the
Appendix.
(c)
Midrails. Middle railings shall be not less than 1 inch by 4
inches finished size.
(d)
Posts. Wood posts or uprights shall be at least equal in
section to 2 inches by 4 inches finished size. Specially formed metal or cast
posts, used in connection with wood railings, are acceptable if they meet the
rigidity and strength requirements specified for these posts in §§
47.233-47.234 (relating to pipe railings;
metal railings other than pipe). Wood posts which are an integral part of the
under or over structure are acceptable if they meet the spacing and strength
requirements specified in §§
47.232-47.233 (relating to construction;
pipe railings.) Reference should be made to Plate 3 of the Appendix.
Notes
State regulations are updated quarterly; we currently have two versions available. Below is a comparison between our most recent version and the prior quarterly release. More comparison features will be added as we have more versions to compare.
No prior version found.