S.C. Code Regs. 61-79.261.BB.1058 - Standards: Pumps and valves in heavy liquid service, pressure relief devices in light liquid or heavy liquid service, and flanges and other connectors
(a)
Pumps and valves in heavy liquid service, pressure relief devices in light
liquid or heavy liquid service, and flanges and other connectors shall be
monitored within five (5) days by the method specified in section 261.1063(b)
if evidence of a potential leak is found by visual, audible, olfactory, or any
other detection method.
(b) If an
instrument reading of ten thousand (10,000) ppm or greater is measured, a leak
is detected.
(c)
(1) When a leak is detected, it shall be
repaired as soon as practicable, but not later than fifteen (15) calendar days
after it is detected, except as provided in section 261.1059.
(2) The first attempt at repair shall be made
no later than five (5) calendar days after each leak is detected.
(d) First attempts at repair
include, but are not limited to, the best practices described under section
261.1057(e).
(e) Any connector that
is inaccessible or is ceramic or ceramic-lined (e.g., porcelain, glass, or
glass-lined) is exempt from the monitoring requirements of paragraph (a) of
this section and from the recordkeeping requirements of section
261.1064.
Notes
State regulations are updated quarterly; we currently have two versions available. Below is a comparison between our most recent version and the prior quarterly release. More comparison features will be added as we have more versions to compare.
No prior version found.