Utah Admin. Code R307-401-4 - General Requirements
The general requirements in Subsections R307-401-4(1) through R307-401-4(4) apply to any new and modified installations, including installations that are exempt from the requirement to obtain an approval order.
(1) Any control apparatus installed on an
installation shall be adequately and properly maintained.
(2) If the director determines that an
exempted installation is not meeting an approval order or State Implementation
Plan limitation, is creating an adverse impact to the environment, or would be
injurious to human health or welfare, the director may require the owner or
operator to submit a notice of intent and obtain an approval order in
accordance with Sections
R307-401-5 through
R307-401-8. The director will
complete an appropriate analysis and evaluation in consultation with the owner
or operator before determining that an approval order is required.
(3) Low Oxides of Nitrogen Burner Technology.
(a) Except as provided in Subsection
R307-401-4(3)(b),
when existing fuel combustion burners are replaced, the owner or operator shall
install low oxides of nitrogen burners or equivalent oxides of nitrogen
controls, as determined by the director, unless such equipment is not
physically practical or cost effective. The owner or operator shall submit a
demonstration that the equipment is not physically practical or cost effective
to the director for review and approval before beginning
construction.
(b) Subsection (a)
does not apply to non-commercial, residential buildings.
(4) A person may not operate a source of air
pollution that is required to have a permit under Rule R307-401 unless the
person has obtained a permit for the source under the procedures of Rule
R307-401.
Notes
State regulations are updated quarterly; we currently have two versions available. Below is a comparison between our most recent version and the prior quarterly release. More comparison features will be added as we have more versions to compare.
No prior version found.