Utah Admin. Code R309-530-9 - New Treatment Processes or Equipment

The policy of the Board is to encourage, rather than to obstruct, the development of new methods and equipment for the treatment of water. Nevertheless, any new processes or equipment must have been thoroughly tested in full-scale, comparable installations, before approval of plans can be issued.

No new treatment process will be approved for use in Utah unless the designer or supplier can present evidence satisfactory to the Director that the process will ensure the delivery of water of safe, sanitary quality, without imposing undue problems of supervision, operation, or control.

The Director shall establish the turbidity limit for 95% of turbidity measurements and the maximum turbidity limit which shall not be exceeded. The plant effluent shall meet the requirements of Subsection R309-200-5(5)(a)(ii).


Utah Admin. Code R309-530-9
Amended by Utah State Bulletin Number 2022-06, effective 3/31/2022

State regulations are updated quarterly; we currently have two versions available. Below is a comparison between our most recent version and the prior quarterly release. More comparison features will be added as we have more versions to compare.

No prior version found.