Utah Admin. Code R315-264-1032 - Standards: Process Vents
(a) The owner
or operator of a facility with process vents associated with distillation,
fractionation, thin-film evaporation, solvent extraction, or air or steam
stripping operations managing hazardous wastes with organic concentrations of
at least 10 ppmw shall either:
(1) Reduce
total organic emissions from all affected process vents at the facility below
1.4 kg/h (3 lb/h) and 2.8 Mg/yr (3.1 tons/yr), or
(2) Reduce, by use of a control device, total
organic emissions from all affected process vents at the facility by 95 weight
percent.
(b) If the
owner or operator installs a closed-vent system and control device to comply
with the provisions of Subsection R315-264-1032(a) the closed-vent system and
control device shall meet the requirements of Section
R315-264-1033.
(c) Determinations of vent
emissions and emission reductions or total organic compound concentrations
achieved by add-on control devices may be based on engineering calculations or
performance tests. If performance tests are used to determine vent emissions,
emission reductions, or total organic compound concentrations achieved by
add-on control devices, the performance tests shall conform with the
requirements of Subsection
R315-264-1034(c).
(d) When an owner or operator and
the Director do not agree on determinations of vent emissions and/or emission
reductions or total organic compound concentrations achieved by add-on control
devices based on engineering calculations, the procedures in Subsection
R315-264-1034(c)
shall be used to resolve the disagreement.
Notes
State regulations are updated quarterly; we currently have two versions available. Below is a comparison between our most recent version and the prior quarterly release. More comparison features will be added as we have more versions to compare.
No prior version found.