Utah Admin. Code R315-264-1036 - Reporting Requirements
(a) A
semiannual report shall be submitted by owners and operators subject to the
requirements of Sections
R315-264-1030
through 1036 to the Director by dates specified by the Director. The report
shall include the following information:
(1)
The Environmental Protection Agency identification number, name, and address of
the facility.
(2) For each month
during the semiannual reporting period, dates when the control device exceeded
or operated outside of the design specifications as defined in Subsection
R315-264-1035(c)(4)
and as indicated by the control device monitoring required by Subsection
R315-264-1033(f)
and such exceedances were not corrected within 24 hours, or that a flare
operated with visible emissions as defined in Subsection
R315-264-1033(d)
and as determined by Method 22 monitoring, the duration and cause of each
exceedance or visible emissions, and any corrective measures taken.
(b) If, during the semiannual
reporting period, the control device does not exceed or operate outside of the
design specifications as defined in Subsection R315-264-264-1035(c)(4) for more
than 24 hours or a flare does not operate with visible emissions as defined in
Subsection R315-264-264-1033(d), a report to the Director is not required.
Notes
State regulations are updated quarterly; we currently have two versions available. Below is a comparison between our most recent version and the prior quarterly release. More comparison features will be added as we have more versions to compare.
No prior version found.