Utah Admin. Code R315-265-1055 - Air Emission Standards for Equipment Leaks - Standards: Sampling Connection Systems
(a) Each sampling
connection system shall be equipped with a closed-purge, closed-loop, or
closed-vent system. This system shall collect the sample purge for return to
the process or for routing to the appropriate treatment system. Gases displaced
during filling of the sample container are not required to be collected or
captured.
(b) Each closed-purge,
closed-loop, or closed-vent system as required in Subsection R315-265-1055(a)
shall:
(1) return the purged process fluid
directly to the process line; or
(2) collect and recycle the purged process
fluid; or
(3) be designed and
operated to capture and transport the purged process fluid to a waste
management unit that complies with the applicable requirements of Sections
R315-265-1085 through
R315-265-1087 or a control
device that complies with the requirements of Section
R315-265-1060.
(c)
In-situ sampling systems and sampling systems without purges are exempt from
the requirements of Subsections R315-265-1055(a) and
R315-265-1055(b).
Notes
State regulations are updated quarterly; we currently have two versions available. Below is a comparison between our most recent version and the prior quarterly release. More comparison features will be added as we have more versions to compare.
No prior version found.