Utah Admin. Code R432-4-9 - Construction Documents
(1) The applicant
or licensee shall submit to OL one printed set of construction documents,
including drawings and specifications representing any products and materials,
and show any equipment necessary for the construction and operation of the
proposed work.
(2) The applicant or
licensee shall ensure drawings are drawn to scale and include the following
information describing the work:
(a) a list of
applicable building codes;
(b) the
construction-type;
(c) the location
of the building on the site and access to the building for public, emergency,
and service vehicles;
(d) the site
grading and drainage;
(e) any
unusual site conditions, including easements that might affect the
building;
(f) any means of
egress;
(g) the subdivision of
smoke compartments;
(h) the
relationships of departments to each other;
(i) the relationships of departments to
support and common facilities;
(j)
the relationships of rooms and spaces within departments;
(k) the number of inpatient beds;
(l) total square footage area of each story
of the building for new construction and each story impacted by new work in an
existing building;
(m) the total
square footage of any addition, alteration, repair, renovation, refurbishment
or remodel of an existing facility;
(n) the square footage area and dimensions of
rooms;
(o) the location and size or
capacity of any public utilities;
(p) the engineered drawings and
specifications for each mechanical, electrical, plumbing, and auxiliary system;
and
(q) the designation for the
installation of equipment that requires a dedicated building service, special
structure, or major function of space.
(3) If, during a construction plan review or
during construction, the work deviates from the original construction plan, the
applicant or licensee shall submit any revised construction documents showing
the extent and scope of the changes to OL for review.
Notes
State regulations are updated quarterly; we currently have two versions available. Below is a comparison between our most recent version and the prior quarterly release. More comparison features will be added as we have more versions to compare.
(1) New construction, additions and remodels to existing structures, shall comply with Department rules in effect on the date the schematic drawings are submitted to the Department.
(2) If the remodeled area or addition in any building, wing, floor or service area of a building exceeds 50 percent of the total square foot area of the building, wing, floor or service area, then the entire building, wing, floor or service area shall be brought into compliance with adopted codes and rules governing new construction which are in effect on the date the schematic drawings are submitted to the Department.
(3) During remodeling and new construction, the licensee must maintain the safety level which existed prior to the start of work.