Utah Admin. Code R657-9-6 - Tagging Tundra Swans and Sandhill Cranes
(1)
(a) A
person that takes a tundra swan or sandhill crane must tag the carcass, as
provided in Section
23A-4-709, immediately upon
taking possession of the carcass and reaching a location listed in Subsections
(i) through (iii), that is closest to the place where the carcass was first
retrieved by the hunter, another person, or a dog:
(i) the blind or fixed location in the field
where the person taking the tundra swan was set up and from where they shot at
the tundra swan;
(ii) a vessel
available to the person; or
(iii)
the first area of land free from standing water.
(b) "Vessel" means, for the purposes of this
subsection, any type of watercraft used or capable of being used as a means of
transportation on water.
(2) To tag a tundra swan and sandhill crane
carcass, a person shall:
(a) completely detach
the tag from the license or permit;
(b) completely remove the appropriate notches
to correspond with the date the tundra swan or sandhill crane was taken;
and
(c) attach the tag to the
tundra swan carcass so that the tag remains securely fastened and
visible.
(3) A person
may not:
(a) remove more than one notch
indicating the date; or
(b) tag
more than one tundra swan or sandhill crane carcass using the same
tag.
(4) A person may
not hunt or pursue a tundra swan or sandhill crane after:
(a) shooting and retrieving the tundra swan
or sandhill crane;
(b) the tag is
detached from the permit; or
(c)
any of the notches have been removed from the tag.
Notes
State regulations are updated quarterly; we currently have two versions available. Below is a comparison between our most recent version and the prior quarterly release. More comparison features will be added as we have more versions to compare.
No prior version found.