Utah Admin. Code R708-31-8 - Camera Requirements

(1) A manufacturer submitting a system for certification shall ensure cameras installed on a system shall:

(a) not impede the field of vision for the safe and legal operation of the vehicle;

(b) not pose a threat to the driver or passengers of the vehicle in the event of dislodgement;

(c) take an image of the individual with sufficient clarity to allow identification;

(d) capture images of the individual conducting the breath alcohol test for the following:

(i) successful completion of the initial breath test sample;

(ii) successful completion of any retest breath test sample;

(iii) unsuccessful delivery of the initial breath test sample;

(iv) unsuccessful delivery of any retest breath test sample; and

(v) high breath alcohol test results;

(e) capture identifiable images in any lighting condition; and

(f) incorporate tamper detection features that include:

(i) covering, blocking, or coating of the lens to distort the image;

(ii) repositioning of the field of view so that it no longer is aimed at the driver; and

(iii) disconnection from communication or power from the system.

(2) Images taken by the camera shall be stored by the manufacturer with the:

(a) date and time of the image capture;

(b) results of each breath test; and

(c) corresponding system serial number of the:

(i) relay; and

(ii) handset.

(3) A manufacturer shall have data readily available to the division upon request.

(4) A system shall be decertified by the division if the system is not equipped with a camera by October 31, 2024.

Notes

Utah Admin. Code R708-31-8

Adopted by Utah State Bulletin Number 2024-06, effective 3/12/2024