Utah Admin. Code R714-160-21 - Vintage Vehicles, Custom Vehicles, and Replica Vehicles

(1) The following are minimum safety equipment requirements for a custom vehicle:

(a) hydraulic service brakes on all wheels with current vehicle brake and stopping standards;

(b) parking brake operating on at least two wheels on the same axle;

(c) seat belts for all passengers and driver;

(d) sealed beam or halogen headlamps;

(e) brake Lamps;

(f) turn signal lamps and switch;

(g) AS-1 safety glass or Lexan; and

(h) electric or vacuum windshield wiper in front of the drivers view.

(2) The inspector shall issue a rejection inspection certificate when any of the above requirements are not met.

(3) Exhaust systems may discharge along the side of the vehicle provided they discharge at a point behind the rear edge of the door and exhaust is directed away from the vehicle.

(4) The vehicle identification for a custom vehicle shall be a number stamped on the frame of the vehicle.

(a) If no such numbers exist, then the requirements as established pursuant to Rule R873-22M-15 must be followed in order to pass inspection.

(5) All safety equipment of a replica vehicle shall comply with the requirements in Subsection 41-6a-1507(3).

Notes

Utah Admin. Code R714-160-21

Adopted by Utah State Bulletin Number 2016-20, effective 9/27/2016 Amended by Utah State Bulletin Number 2019-1, effective 12/6/2018