Utah Code R70-101-12 - Law Label Requirements for Bedding and Upholstered Furniture
(1)
(a) Any
article of bedding or upholstered furniture shall have a law label that uses
the format adopted by the International Association of Bedding and Furniture
Law Officials (IABFLO), as listed in the Manual of Labeling Laws of the
International Sleep Products Association, 2024 edition, which this rule
incorporates by reference.
(2) The law label for a newly manufactured
product shall meet the following requirements:
(a) white on each side of the law
label;
(b) made of material that
cannot be easily torn;
(c) printed
in black ink;
(d) printed in
English;
(e) printed clearly and
legibly; and
(f) firmly attached to
the article.
(3)
Required information shall be printed on one side of the law label with the
opposite side remaining blank.
(4)
Each law label shall include the following, in order:
(a) the phrase "UNDER PENALTY OF LAW THIS TAG
NOT TO BE REMOVED EXCEPT BY THE CONSUMER" in bold at the top of the law label
in capital letters no less than 1/8 inches in height;
(b) the phrase "ALL NEW MATERIAL" in bold,
capital letters no less than 1/8 inch in height, followed by the phrase
"CONSISTING OF", no case or height requirements, followed by the filling
contents in bold capital letters no less than 1/8 inch in height;
(c) the words "CONTENTS STERILIZED" in bold
capital letters no less than 1/8 inch in height;
(d) the URN of the final assembler of the
article;
(e) the sterilization
permit number of the sterilization facility that obtained the material, in bold
capital letters no less than 1/8 inch in height;
(f) the phrase, "Certification is made by the
manufacturer that the materials in this article are described in accordance
with law"; and
(g) the name and
complete address of the manufacturer, importer, or distributor of the
article.
(5)
(a) The law label shall be easily accessible
to the consumer for examination.
(b) A product for sale in a box or in other
packaging that makes a law label inaccessible shall reproduce a legible
facsimile of the law label on the outer container or covering.
(6) A person may not place any
other mark, label, printed matter, illustration, sticker, or device placed on
the law label.
(7) The form of
identification used on a law label shall be the same as those supplied to the
department in a permit application.
Notes
State regulations are updated quarterly; we currently have two versions available. Below is a comparison between our most recent version and the prior quarterly release. More comparison features will be added as we have more versions to compare.
No prior version found.