Utah Code R70-101-13 - Second Hand Tagging Requirements
(1) A tag for a
second hand article shall be:
(a) a minimum of
two inches by three inches;
(b)
yellow on both sides of the tag;
(c) made of material that cannot be easily
torn;
(d) printed in
English;
(e) printed in black
ink;
(f) printed clearly and
legibly; and
(g) firmly attached to
the article.
(2) The
required information shall be printed on one side of the tag, with the opposite
side remaining blank.
(3) A second
hand tag shall contain the following information, in order:
(a) the phrase "UNDER PENALTY OF LAW THIS TAG
NOT TO BE REMOVED EXCEPT BY THE CONSUMER" in bold at the top of the label in
capital letters, no less than 1/8 inch in height;
(b) the phrase, "THIS ARTICLE CONTAINS SECOND
HAND MATERIAL CONSISTING OF CONTENTS UNKNOWN". The words "SECONDHAND MATERIAL"
and "CONTENTS UNKNOWN" shall be in capital letters, size not less than 1/8
inches in height;
(c) the phrase,
"Certification is made that the materials in this article are described in
accordance with law"; and
(d) the
store name and complete corporate address.
(4) A tag shall be easily accessible to the
consumer for examination.
(5) A tag
may not contain marks, labels, printed matter, illustrations, stickers, or any
other device.
Notes
State regulations are updated quarterly; we currently have two versions available. Below is a comparison between our most recent version and the prior quarterly release. More comparison features will be added as we have more versions to compare.
No prior version found.