Utah Code R70-101-14 - Tagging Requirements for Repaired, Reupholstered, and Renovated Products
(1) A tag for a
repaired, reupholstered, or renovated product shall:
(a) be a minimum of two inches by three
inches;
(b) be yellow on both sides
of the tag;
(c) be made of material
that cannot be easily torn;
(d)
have the required information printed on one side of the tag with the opposite
side remaining blank;
(e) be
printed in English;
(f) be printed
in black ink;
(g) be printed
clearly and legibly; and
(h) be
firmly attached to the article.
(2) A tag for a repaired, reupholstered, or
renovated product shall contain the following information, in order:
(a) the phrase, "UNDER PENALTY OF LAW THIS
TAG NOT TO BE REMOVED EXCEPT BY THE CONSUMER" in bold at the top of the label
in capital letters, no less than 1/8 inch in height;
(b) the phrase, "THIS ARTICLE IS NOT FOR SALE
OWNER'S MATERIAL" in bold in capital letters, no less than 1/8 inch in
height;
(c) the phrase,
"CERTIFICATION IS MADE THAT THIS ARTICLE CONTAINS THE SAME MATERIAL IT DID WHEN
RECEIVED FROM THE OWNER AND THAT ADDED MATERIALS ARE DESCRIBED IN THE
ACCORDANCE WITH LAW, AND CONSIST OF THE FOLLOWING:" followed by a description
of the filling material;
(d) a
description of the work that was done on the product;
(e) the URN number;
(f) the name and address of the renovator or
repairer; and
(g) the date of
pick-up, owner's name, and address.
Notes
State regulations are updated quarterly; we currently have two versions available. Below is a comparison between our most recent version and the prior quarterly release. More comparison features will be added as we have more versions to compare.
No prior version found.