Wash. Admin. Code § 296-806-20050 - Make sure restraint or pullback devices meet these requirements
Important:
All devices must meet the general requirements for devices found in, Make sure devices meet these requirements, WAC 296-806-20044.
You must make sure restraint or pullback devices:
(1) Prevent the operator from reaching into
the point of operation or withdraw the operator's hands from the point of
operation before motion of the machine creates a hazard.
(2) Have fasteners, pins, and other items
used to secure and maintain the setting of the device applied in a way that
minimizes loosening, slipping, or failure during use.
(3) Are worn inside gloves, if used, so if a
glove becomes trapped inside a machine or tool, the device can still remove the
operator's hand from the hazard area.
Notes
Statutory Authority: RCW 49.17.010, 49.17.040, 49.17.050, and 49.17.060. 04-14-028, § 296-806-20050, filed 6/29/04, effective 1/1/05.
State regulations are updated quarterly; we currently have two versions available. Below is a comparison between our most recent version and the prior quarterly release. More comparison features will be added as we have more versions to compare.
No prior version found.